454C2500
Newbie
I replaced the fluid and we are good. Next step is to lubricate throttle so its a little less stiff and balanced with the clutch.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I need to do the same, my slave is inside the Bellhousing behind the release bearing. what were the steps to replace the fluid and bleed the slave? ThanksI replaced the fluid and we are good. Next step is to lubricate throttle so its a little less stiff and balanced with the clutch.