barns
Newbie
Hey everyone!
I have a ‘99 K1500 SLT Suburban with the Electrochromic mirror Temp/Compass combo. Recently my Ambient Temp Gauge stopped working, not an ‘OC’ or ‘SC’ Code, just a blank screen.
When I turn on the vehicle, the display works as intended, showing all the possible segments that can light up, including °F and °C. Compass and dimmer work too.
I ended up testing the ambient temp sensor which was at 15k ohm at 60°F (bad) and after replacing the sensor, the ambient temp gauge did not return. Voltage at the sensor is 5V with complete continuity.
Beginning to believe it’s the mirror itself, but it still powers on display, dimmer, and compass.
I would suspect the remote start could be causing issues, however the system was installed 3 years ago without issues since, this issue actually began with a jumpstart, as my batteries are both dead (I’ve been lagging behind on batteries)
I’m starting to pull my hair out. Any help would be much appreciated!
I have a ‘99 K1500 SLT Suburban with the Electrochromic mirror Temp/Compass combo. Recently my Ambient Temp Gauge stopped working, not an ‘OC’ or ‘SC’ Code, just a blank screen.
You must be registered for see images attach
When I turn on the vehicle, the display works as intended, showing all the possible segments that can light up, including °F and °C. Compass and dimmer work too.
You must be registered for see images attach
I ended up testing the ambient temp sensor which was at 15k ohm at 60°F (bad) and after replacing the sensor, the ambient temp gauge did not return. Voltage at the sensor is 5V with complete continuity.
Beginning to believe it’s the mirror itself, but it still powers on display, dimmer, and compass.
I would suspect the remote start could be causing issues, however the system was installed 3 years ago without issues since, this issue actually began with a jumpstart, as my batteries are both dead (I’ve been lagging behind on batteries)
I’m starting to pull my hair out. Any help would be much appreciated!