manual transmission from a diesel truck to gas engine truck

[Nick94]

Would the transmission from an early 90"s diesel truck fit on a gas engine?

 

[GMC/Cummins]

Which trans? What year is the trans? If it's a NV4500 it should work if you have the bellhousing for it also.

 

[glfirefighter144]

The 6.2 / 6.5 have the same bell housing pattern as the small block, just be sure to get the appropriate flywheel and clutch for the trans and you shouldn't have any problems

Sent from my Droid using Tapatalk 2

 

[GMC/Cummins]

The 6.2 / 6.5 have the same bell housing pattern as the small block, just be sure to get the appropriate flywheel and clutch for the trans and you shouldn't have any problems

Sent from my Droid using Tapatalk 2

Make sure you use the flywheel for your engine, and a clutch pressure plate for the transmission.

 

[glfirefighter144]

Make sure you use the flywheel for your engine, and a clutch pressure plate for the transmission.

Sorry, that's what I meant

Sent from my DROID RAZR M using Tapatalk 2

 

[draginlow]

if its a auto 700R4 they have differnt shift points. i found this out when i put a gas 700r4 begind my 6.5 the thing never wanted to shift lol. diesels shift lower in the rpm range.

 

[glfirefighter144]

Manuals are driver choice, transmission still made like a gas truck

Sent from my DROID RAZR M using Tapatalk 2