nprice65
Newbie
Hi I have a 2000 K2500 ccsb that has a squishy pedal while running. I don’t have access to a scan tool to preform abs bleed. I tried to have my buddy pump the brakes while I press the bleeder on the side of the module but I have absolutely zero fluid coming out. I’m not sure where to go next now.
So far, brand new calipers, rotors, pads, and brake hoses on the front. And brand new shoes, wheel cylinders, and hardware in the rear. Have fluid coming out of all 4 corners while bleeding.
Super firm pedal with the truck off and zero leaks from what I can tell.
Please help! Thanks in advance, I tried searching the forums and didn’t see any threads regarding to no fluid coming out the abs module
So far, brand new calipers, rotors, pads, and brake hoses on the front. And brand new shoes, wheel cylinders, and hardware in the rear. Have fluid coming out of all 4 corners while bleeding.
Super firm pedal with the truck off and zero leaks from what I can tell.
Please help! Thanks in advance, I tried searching the forums and didn’t see any threads regarding to no fluid coming out the abs module