JWall's 98 Reg Cab SWB

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JWall

@jwall202
Joined
Feb 25, 2011
Messages
142
Reaction score
409
Location
Tulsa, OK
This week & weekend we got most of the wiring & plumbing done.
Also, made the mount for the switch panel. It will mount to the seat frame between my legs. (I don't like seeing switches for air ride on my trucks).

I also mounted the air gauge. Since I will be doing the Little Shops rear disc brake kit and doing the non e-brake calipers I removed the e-brake handle & mounted the gauge in the recess for the release handle. It's visible for the driver but not a focal point of the interior.

The gauge and switch location is very similar to the set up in my C10 which works well... so why change it?

Should finish up wiring this week too...


You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach


AFTER PAINT...
You must be registered for see images attach



GAUGE LOCATION...
You must be registered for see images attach
 

JWall

@jwall202
Joined
Feb 25, 2011
Messages
142
Reaction score
409
Location
Tulsa, OK
Finished product before reinstalling the bed...

All the air management mounted to the aluminum plate from the bottom so that it is all accessible with the bed on.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach


You must be registered for see images attach
 

JWall

@jwall202
Joined
Feb 25, 2011
Messages
142
Reaction score
409
Location
Tulsa, OK
And back together... still needs a few things buttoned up & needs REAL GOOD cleaning...

You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 
Top