Interior door handle

[Alfredo7474]

I am replacing my old interior door handle that broke with a new one I found at the junkyard. I know I have to drill out the rivets holding in the door handle, but what type/size of rivet should I use to replace them? Thanks

 

[Caman96]

If no one answers, try finding size by slipping drill bits into hole after rivet is removed to get size.

 

[Caman96]

Or…

Inside Door Handle Rivet-Classic Chevy Truck Parts

One required per side.

www.classicparts.com

 

[Alfredo7474]

Would rather get some today at Home Depot or Ace rather than wait a week for them…

 

[Caman96]

Would rather get some today at Home Depot or Ace rather than wait a week for them…

Then try option A^^^

 

[xXxPARAGONxXx]

I am replacing my old interior door handle that broke with a new one I found at the junkyard. I know I have to drill out the rivets holding in the door handle, but what type/size of rivet should I use to replace them? Thanks

POP SD66BS or equivalent:
POP® Open End Blind Rivet, Unit of Measure: Inch, 3/16 Inch Diameter, 0.187 Inch Decimal Equivalent, 0.251 Inch (6.38mm) Minimum Grip, 0.375 Inch (9.53mm) Maximum Grip, 0.251 - 0.375 Inch (6.37 - 9.53mm) Grip Range, Dome Head, Steel Body Material, Material Detail: Steel C1006-C1010, Zinc Clear Trivalent Body Finish, Finish Detail: Zinc Clear Trivalent, Steel Mandrel Material, Coated Mandrel Finish, 0.192 Inch (4.88mm) Minimum Hole Size, 0.196 Inch (4.98mm) Maximum Hole Size, #10 Drill Size, 0.393 Inch (9.98mm) Head Diameter, 0.057 Inch (1.45mm) Head Height, 0.550 Inch (13.97mm) Body Length, Overall Body Length Including Mandrel: 0.710 Inch (18.03mm), 0.114 Inch (2.90mm) Mandrel Diameter, 590 lbf. (2.62kN) Shear Strength, 815 lbf. (3.63kN) Tensile Strength, RoHS Compliant Yes

 

[HotWheelsBurban]

Yes 3/16" ones are what I used on the Burb. Had to replace all 4 handles last year....

 

[GoToGuy]

It would help yourself if you gave year make model, as handles change.