best97obs
I'm Awesome
Also, what all exactly do I need to have tuned out on the 0411? I know the basic stuff like no VATS but is there anything else that I need to be aware of when I have it tuned?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
yes there is have the speed limiter removed tell the tuner your gear ratio tire sizeAlso, what all exactly do I need to have tuned out on the 0411? I know the basic stuff like no VATS but is there anything else that I need to be aware of when I have it tuned?
There are certain functions where the PCM needs to know you are in P/N. Namely the CASE learn procedure and some other ones. So if you aren't going to actually wire the correct wires, you need to wire two pins to ground so that it just always thinks you are in P/N. I can't remember which ones off the top of my head, but I think my lextech spreadsheet had that called out in the notes on the top.alright thanks. if it isn't strictly required would it mess anything up with the computer, motor, or tranny at all?
There are certain functions where the PCM needs to know you are in P/N. Namely the CASE learn procedure and some other ones. So if you aren't going to actually wire the correct wires, you need to wire two pins to ground so that it just always thinks you are in P/N. I can't remember which ones off the top of my head, but I think my lextech spreadsheet had that called out in the notes on the top.
That's good info, never heard of that before.If it has a 4L60E or 4L80E and you select, No Switch in HP Tuners, the PCM gets that data from the manifold pressure switch on the valve body. My 0411 and P59 have both been setup that way.
If it has a 4L60E or 4L80E and you select, No Switch in HP Tuners, the PCM gets that data from the manifold pressure switch on the valve body. My 0411 and P59 have both been setup that way.
So with HPtuners I'll be able to "delete" the wires? It will run and work fine if so right?If it has a 4L60E or 4L80E and you select, No Switch in HP Tuners, the PCM gets that data from the manifold pressure switch on the valve body. My 0411 and P59 have both been setup that way.