racprops
OBS Enthusiast
Installing a SBC 383 in a 93 G20:
I need a larger pan, seems many are 4.5 QT models, then there are 5 Qts and 6 QTs models, I would like to run a 6 QT pan IF it will fit, so anyone done an engine swap and ran a large pan??
So here is the pan problem, I am running a BBC Oil pump for the greater oil flow and control which is needed when running a SBC at 1500RPMs.
BUT my stock oil pan is too small and hits the new pump. Missed it by this much ONE INCH.
Next will the stock dip stick still work??
I am told I need two things in the pan, first, baffles to hold the oil around the pickup, and a windage tray under the crank.
I am looking for answers and any donations or offers.
Rich
I need a larger pan, seems many are 4.5 QT models, then there are 5 Qts and 6 QTs models, I would like to run a 6 QT pan IF it will fit, so anyone done an engine swap and ran a large pan??
So here is the pan problem, I am running a BBC Oil pump for the greater oil flow and control which is needed when running a SBC at 1500RPMs.
BUT my stock oil pan is too small and hits the new pump. Missed it by this much ONE INCH.
Next will the stock dip stick still work??
I am told I need two things in the pan, first, baffles to hold the oil around the pickup, and a windage tray under the crank.
I am looking for answers and any donations or offers.
Rich