headlight question

[tailpipe51]

so im trying to wire in my seal beams and the wire colors are the same as my composite so i match the colors up and the ground is shared but i only have highbeams and no low beams did i do something wrong here????

 

[great white]

Get a test light and start tracing down which wire does what.

Looking at colors and using blind faith almost never works out well......

 

[tailpipe51]

ok will do i also looked at the wiring diagram

 

[Half Assed]

check the pins on the plug for voltage when the low beams are on

then check the wire that you didn't use for voltage if you don't have any at the plug

 

[tailpipe51]

well ik what im doing wendsday