gauge cluster options

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Devs93

OBS 4 EVA
Joined
Aug 16, 2010
Messages
13,122
Reaction score
166
Location
Shelbyville IN
You must be registered for see images

I calls it cotten candy

Sent from my ADR6350 using Tapatalk 2
 

Pierced

Allen AKA BargainJoe
Joined
Mar 15, 2011
Messages
871
Reaction score
19
Location
Bossier City, La
Crappy picture.

Cleared gauges, red needles, white LEDs.

You must be registered for see images attach
 

Green95Hoe

Rollin in tha big hoe
Joined
Dec 7, 2009
Messages
68
Reaction score
21
Location
SE Mass.
I know I don't have your dash, but this is how I did mine. Having the whole rectangle all white was too much for me. I overlayed the chrome ring piece over the white face and made the needles red by scraping off the coloring on the back with a razor blade and applying red nail polish.

You must be registered for see images

You must be registered for see images
 

TruckinAin4Sissies

L.E.D. Whisperer
Joined
Aug 17, 2011
Messages
2,678
Reaction score
99
Location
In a Big-Rig
I know I don't have your dash, but this is how I did mine. Having the whole rectangle all white was too much for me. I overlayed the chrome ring piece over the white face and made the needles red by scraping off the coloring on the back with a razor blade and applying red nail polish.

You must be registered for see images

You must be registered for see images

Should've candied them, I imagine it's difficult to see them at night.



-Truckin-
 

Green95Hoe

Rollin in tha big hoe
Joined
Dec 7, 2009
Messages
68
Reaction score
21
Location
SE Mass.
Not at all actually. Maybe the night pic isnt that great and out of focus. There is a selection switch so I can go back and forth between blue and green. I also have the brightness turned way down because at full its obnoxiously bright.
 

lilrobb

Newbie
Joined
Mar 16, 2012
Messages
17
Reaction score
0
I just had a vinyl overlay made for mine...waiting on led bulbs to come in and also gonna clear needles...


You must be registered for see images attach
 

DonYukon

Dont stop until it sounds expensive
Joined
Aug 9, 2012
Messages
1,120
Reaction score
778
Location
Fayetteville NC
last time i checked they were pricey but Usspeedo makes a stainless i had in mine for a while ill try and dig up a pic
 

Fallsey

OBS Enthusiast
Joined
Aug 12, 2012
Messages
75
Reaction score
1
I know I don't have your dash, but this is how I did mine. Having the whole rectangle all white was too much for me. I overlayed the chrome ring piece over the white face and made the needles red by scraping off the coloring on the back with a razor blade and applying red nail polish.

You must be registered for see images

You must be registered for see images


Where can I find this overlay and is it available in metric?

Thanks,
Casey
 
Top