oohunter04oo
Like a Rock
So, today i get a phone call from a friend, he says a guy that works for him has a truck with a 6" fabtech lift and 36's and he wants to take it off but needs the stock parts. He thought i had a lift and wanted to see if i would sell them. But i offered to trade him my stock parts for his lift, if he has all/most of the parts and nothing is tore up or bent. I told him i wouldnt have time till after hunting season and he was ok with that. i also told him his front diff would not go back in due to cutting off the top mount on the diff. and he said he didnt care if it had 4wd or not, he just wants it back lowered on stock size tires. So obviously this is a knuckle lift which i dont care for because of the track width, but if its free.... so my thoughts where if its in decent shape i will put it on my truck. put the stock sawblades on with my boggers and get 1.5"/2" spacers in the rear to keep the tires about where they are now. what are y'alls thoughts and opinions on this?
heres a pic of the truck on the sawblades with the boggers. i could not turn much at all and the rear tires rubbed the leaf springs.
heres a pic of the truck on the sawblades with the boggers. i could not turn much at all and the rear tires rubbed the leaf springs.
You must be registered for see images attach