Floor shifter boot

[98Mike]

Anyone know where I can find a manual transmission (5 speed) shifter boot? I can find the mounting screws but not the actual rubber boot.

 

[xXxPARAGONxXx]

I only see a used one on eBay.

GM 15959690 Boot Assembly Manual Transmission Control Lever Cover | eBay

<p dir="ltr" style="margin-top:0; margin-bottom:0;">Item pictured is what you will receive! </p> <br> <p dir="ltr" style="margin-top:0; margin-bottom:0;">It has some Scuff and scratches! And a small tear at the very bottom. I don't believe it will affect anything. I took several pictures of...

www.ebay.com

Alternative is a local salvage yard or trying to search an online salvage yard directory.

 

[SNCTMPL]

Are you just looking for the factory boot?

 

[GM Guy]

88-91 sm465 boot
88-94 mg5/92-94 NV4500 boot or
95+ boot?

also, where are you finding the screws?

 

[98Mike]

Are you just looking for the factory boot?

Yes. 98 model.

 

[98Mike]

88-91 sm465 boot
88-94 mg5/92-94 NV4500 boot or
95+ boot?

also, where are you finding the screws?

98 model. Screws are available @ classicparts.com

 

[SNCTMPL]

I have the one from my son’s 89, if you want it. I think it’s in good shape.

 

[98Mike]

I appreciate it, but it looks like there might be a difference between 89 & 98 models.

 

[sewlow]

Is this what you're looking for? '97 w/NV3500.

You must be registered for see images attach

So ugly. (Not just the boot. That floor...! Ew.)
Are you dead-set on OEM?
I made this when I installed the CORE/Hurst shifter. Leather. Thick leather. Too thick!
But I just stitched it up outa some scraps that were close at hand.
With thinner, or vinyl, that bulk around the top would be a lot less.
It's over top of the C/H-supplied dust boot.
Got an upholsterer/trimmer guy around your area?

You must be registered for see images attach

The C/H-supplied dust boot.

You must be registered for see images attach

 

[SNCTMPL]

Is this what you're looking for? '97 w/NV3500.

You must be registered for see images attach

So ugly. (Not just the boot. That floor...! Ew.)
Are you dead-set on OEM?
I made this when I installed the CORE/Hurst shifter. Leather. Thick leather. Too thick!
But I just stitched it up outa some scraps that were close at hand.
With thinner, or vinyl, that bulk around the top would be a lot less.
It's over top of the C/H-supplied dust boot.
Got an upholsterer/trimmer guy around your area?

You must be registered for see images attach

The C/H-supplied dust boot.

You must be registered for see images attach

That looks good, that’s why I have the stock one available, I got the Core shifter and the old school Hurst style boot.

You must be registered for see images attach