Early style center console ?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jeff's88silverado

I'm Awesome
Joined
Dec 11, 2010
Messages
488
Reaction score
5
Location
Georgia
I've tried searching the site but i cant seem to find what i'm wanting to know.

But is there anything missing and does the blue tray suppose to slide freely or is there suppose to be something to lock it in place because if i keep it slid back where its flush on the outside it always slides out some after i drive

You must be registered for see images attach
 

1997chevydriver

OBS MAGIC!!
Supporting Member
Joined
Sep 13, 2011
Messages
15,899
Reaction score
181
Location
Minnesota
there should be a little stop in there somewhere.......

Ill run out to my 94 and take a few pics quick.
 

1997chevydriver

OBS MAGIC!!
Supporting Member
Joined
Sep 13, 2011
Messages
15,899
Reaction score
181
Location
Minnesota
Here is a couple pics. Don't mind the mess its my mud rig/ parts vehicle at the moment so its not very clean! The only catch I could find is on the lid of the console (in the second pic)
You must be registered for see images attach
You must be registered for see images attach
 

jeff's88silverado

I'm Awesome
Joined
Dec 11, 2010
Messages
488
Reaction score
5
Location
Georgia
Now i gotta go look at mine. Also the tray has the little slides that keep it in track. Can you tell what holds them to the tray
 

1997chevydriver

OBS MAGIC!!
Supporting Member
Joined
Sep 13, 2011
Messages
15,899
Reaction score
181
Location
Minnesota
I think its just a couple phillips head screws. If you are trying to remove the tray just spread the sides of the console away from each other and pull the tray out.
 

jeff's88silverado

I'm Awesome
Joined
Dec 11, 2010
Messages
488
Reaction score
5
Location
Georgia
Must be some kind of design change from 90 to a 94

Because i dont have nothing like that

You must be registered for see images attach


I think its just a couple phillips head screws. If you are trying to remove the tray just spread the sides of the console away from each other and pull the tray out.

Yea thats how i remove it. but mine has nothing holding the slides on so they usually fall off if i fool with it alot.
 
Top