Dakota digital fan controller wiring, help needed

[asolek88]

So im looking over the directions and I dont quite understand the wiring. Heres the link http://www.dakotadigital.com/pdf/pac-2700.pdf
What I dont understand is wiring the relay. Does the green wire get connected to the fans power wire and the black goes to the fan ground? The red to the battery with a fuse? I am not seeing anywhere on the directions what size fuse to use.

You must be registered for see images attach

 

[Cablguy184]

cant see the link ... thinking its my computer ...

anyhow ... heres what I know about the relay ...

The red wire goes to a direct positive 12 volts (shortest wire to the battery connection point possible) ...
The black wire should combine with your units ground wire and go to ground (shortest wire to the grounding point as possible would be best) ...
The white wire connects to your switch to turn on your unit ... or thremostat sensor, or what ever starts up the fan unit ...
Then the green wire connects to your input to the fan unit ...

This should work for you Sir ... Best of luck !!!