Current cab mount situation

[94K3500PROJECT]

Is there a place that has stock rubber cab mounts?
I’ve searched and as of this week didn’t find anything.

Poly mounts are out. I’ll adapt some other truck cab mounts before going that route

 

[packer0440]

LMC truck has them, but a lot of stuff on backorder. Just make sure you get the original style cause they also carry the polyurethane ones.

 

[Vanishing Point]

My previous colleague beat me to the punch, but at least I have their info for you to make it a little easier to locate.
Good luck! www.LMCtruck.com located in Lenexa, Kansas 66285-4991 P.O.Box 14991
Customer Service 1-(800)-222-5664 / Order Desk 1-(800)-562-8782

 

[stutaeng]

I don't believe they are made anymore by GM, but there's a mod. where you can use GMT900 mounts. There's been a few links/threads on that, but seems like the link I was thinking on truck central is no longer working? I believe the 900 mounts have some sort of fluid or something for dampening.

The GMT900 mounts are expensive though. Around $175 or so for a pair, that was like 5 years ago.

 

[Supercharged111]

I don't believe they are made anymore by GM, but there's a mod. where you can use GMT900 mounts. There's been a few links/threads on that, but seems like the link I was thinking on truck central is no longer working? I believe the 900 mounts have some sort of fluid or something for dampening.

The GMT900 mounts are expensive though. Around $175 or so for a pair, that was like 5 years ago.

The GMT900 mounts are the rear-most only and only for xcab/crew cab trucks.

 

[stutaeng]

The GMT900 mounts are the rear-most only and only for xcab/crew cab trucks.

I actually bought a set a while back after reading that article. My extended cab GMT 800 has this pop in the rear cab somewhere under certain turns. I thought it was the cab mounts, but they didn't fit. I can't recall why. They've been in my garage for a while and was cleaning and spotted them in the corner.

Maybe I can try them on my GMT 400 crew cab then?

 

[Supercharged111]

I actually bought a set a while back after reading that article. My extended cab GMT 800 has this pop in the rear cab somewhere under certain turns. I thought it was the cab mounts, but they didn't fit. I can't recall why. They've been in my garage for a while and was cleaning and spotted them in the corner.

Maybe I can try them on my GMT 400 crew cab then?

I put them on my 1500.

 

[94K3500PROJECT]

I actually bought a set a while back after reading that article. My extended cab GMT 800 has this pop in the rear cab somewhere under certain turns. I thought it was the cab mounts, but they didn't fit. I can't recall why. They've been in my garage for a while and was cleaning and spotted them in the corner.

Maybe I can try them on my GMT 400 crew cab then?

Here’s a write up about installing them.
I was intending to install them on my crew cab and stock rubber everywhere else

 

[Caman96]

I’ve actually recently just purchased the Dorman front core supports w/shims and t

You must be registered for see images attach

he other 4 for Reg. Cab OEM GM mounts. Of the 4, the front 2 were sourced from the States and the more difficult(almost impossible) were sourced from Brazil(should arrive very soon). I do, however, have a new aftermarket rubber set, I also purchased from Brazil that I’m willing to sell.