KleenScottsdale
Newbie
Any part number for 3" tailpipe?... for my 89 K1500 305 short bed preferably. ThanksWhen I built my exhaust system, it was 2 1/2" to the Y then 3" single pipe/cat/muffler/tailpipe
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Any part number for 3" tailpipe?... for my 89 K1500 305 short bed preferably. ThanksWhen I built my exhaust system, it was 2 1/2" to the Y then 3" single pipe/cat/muffler/tailpipe
I just got one not long ago. The 3 inch tailpipe right side exit was for a diesel application. I can get a part number off it later today. I figure I'll have to trim the front for a shortbed.Any part number for 3" tailpipe?... for my 89 K1500 305 short bed preferably. Thanks
Part of "not getting our hobby banned" is being honorable and doing the right thing. WCJr came to me straight-piped, and I spent the money to put cats on it. Roscoe was straight piped as well, and when I build the exhaust for it, it will have cats as well.
I think there are more important things in this country that we need to worry about than an individual running his rig without a cat. Illegal, who the freak cares...lol!Illegal--violates FEDERAL law. The only thing you have going for you is that there's little enforcement unless the State or County does it.
It's also going to be a D-I-Y project, no decent shop will touch a catalyst delete as it carries a potential $10,000 fine--and there IS enforcement on that, although it's spotty.
Good find! https://www.summitracing.com/parts/wlk-66044The tailpipe is a Walker Universal pipe #66044. Got it from Summit, cost was $51.99. You can also get it from Amazon