Hummer369873
Newbie
ABS MODULE ON MY 1998 330 GMC CHASSIS MOTOR HOME NOT WORKING. BLED BRAKES WITH ENGINE OFF, GET FULL PEDAL. START PEDAL GOES SOFT. DONT KNOW IF CAn still get module. Looking for ideas
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Did you bleed the ABS with a scan tool? I never consider what the brakes feel like with the engine off.ABS MODULE ON MY 1998 330 GMC CHASSIS MOTOR HOME NOT WORKING. BLED BRAKES WITH ENGINE OFF, GET FULL PEDAL. START PEDAL GOES SOFT. DONT KNOW IF CAn still get module. Looking for ideas
New master cylinder. Brake light will not turn off, brake switch is ok. Manual brake light turns off when taken out off park. My mechanic feels it’s the module.What makes you think the ABS module is bad? That doesn't initially sound like a module problem unless you have done more diagnosis, that sounds more like a master cyl or booster problem.
Also, please try to punctuate and use CAPS normally.
Contact these guys, if needed, they rebuild ABS modules.Did you(or mechanic)bleed the ABS with a scan tool?
Thanks for the informationContact these guys, if needed, they rebuild ABS modules.
subdomain.rapidtransitservices.com
Specializing in Instrument Gauge Cluster and Electronic Brake Control Module Repairs.rapidtransitservices.com
Still wondering here though…did mechanic use scan tool to cycle ABS to bleed?Thanks for the information
I believe soStill wondering here though…did mechanic use scan tool to cycle ABS to bleed?
Was it properly bench-bled? Doing a decent job takes more time and effort than most folks realize.New master cylinder.
Which "brake light" are you talking about? The one in the instrument cluster, or the ones at the back of the vehicle?Brake light will not turn off, brake switch is ok.
I have no idea what this means.Manual brake light turns off when taken out off park.
Sure, that's possible.My mechanic feels it’s the module.