Chris253
I'm Awesome
so ive successfully installed a remote start/alarm/keyless entry system in my truck and everything works but the door lock button seems to be reversed. i tried to fiddle with it again today but so far ive done just about everything. what im saying is that when i push the door lock button on the drivers side downward, it'll unlock. if i push it upwards, it'll lock. so now when i used my fob to unlock it or lock it, it'll do the opposite. the lock button will unlock and arm the alarm so it'll go off when i open the door, and the unlock will lock it and disarm the alarm. one thing i did do was switch the wiring on the drivers side door lock button that goes to a 451m relay for the reverse polarity locks and it worked for the drivers side when i push the button manually but blows the fuse if i use the fob. the passenger side stayed the same (lock unlocks, unlock locks) so im thinking i might wire the passenger side the same way.
i know at least one of the door lock switches were replaced by the previous owner, so, is it possible that maybe they bought a new one and wired it up, possibly incorrectly and fixed the other side to match? or something?
i know at least one of the door lock switches were replaced by the previous owner, so, is it possible that maybe they bought a new one and wired it up, possibly incorrectly and fixed the other side to match? or something?