Finally my build thread, I already started last year (actually November 2013) and still not finished....
It is an 89 Chevrolet (although it has a GMC grill), with a ZZ4, th700 and 2wd. It is lowered 2 - 4 and has 17" Boyd Rodders, they need to be polished again...
This is my truck when I started, it looked decent and no rust on the sheet metal. Only with the yearly inspection I got a remark that the chassis was rusted. It wasn't rot, it just didn't had any paint on it anymore. Initially I just wanted to remove the fenders and the bed and paint the rails but in the end I removed everything and had the chassis sandblasted.
I have to do everything on my driveway because my garage is too small. The truck just fits but than there's no place to do anything else. The only thing I could do inside, was pulling the engine and trans.
Some before pictures;
Future plans:
lower 4-6 and box the frame
replace steering box with steering rack
lt4 hot cam and 1.6 rockers
ditch the carb and replace by a multi point fuel injection
1996 interior
It is an 89 Chevrolet (although it has a GMC grill), with a ZZ4, th700 and 2wd. It is lowered 2 - 4 and has 17" Boyd Rodders, they need to be polished again...
This is my truck when I started, it looked decent and no rust on the sheet metal. Only with the yearly inspection I got a remark that the chassis was rusted. It wasn't rot, it just didn't had any paint on it anymore. Initially I just wanted to remove the fenders and the bed and paint the rails but in the end I removed everything and had the chassis sandblasted.
I have to do everything on my driveway because my garage is too small. The truck just fits but than there's no place to do anything else. The only thing I could do inside, was pulling the engine and trans.
Some before pictures;
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Future plans:
lower 4-6 and box the frame
replace steering box with steering rack
lt4 hot cam and 1.6 rockers
ditch the carb and replace by a multi point fuel injection
1996 interior