88-89 mini quad headlamp assemblies

[BHBurban]

Looking to buy complete 88-89 quad headlight housings and mountings.

Like these...

You must be registered for see images attach

 

[88GMCtruck]

Gregg, I know there are 3 sets at my buddy's junkyard. If you don't find any by this weekend I can pick you up a set.

 

[jdyates]

Are there any available for HIDs? Like with the ability to plug in a bulb?

 

[88GMCtruck]

Stock they are sealed beam. You have to upgrade to another housing and add HIDs. IMO the best lights are the E-code Bosch from GM (hard to find) with the LMC ones (pictured on Gregg's truck above) close behind them.

Here is a great deal of info to read over on the 88-89 split lights and my HID upgrade.

88-89 GMT400 Quad Sealed Beam upgrades (Bosch T84 E-code headlights): http://www.gmt400.com/forum/showthr...d-Beam-upgrades-(Bosch-T84-E-code-headlights)
88GMCtruck's non-projector HID conversion: http://www.gmt400.com/forum/showthread.php?948-88GMCtruck-s-non-projector-HID-conversion

 

[GMCTRUCKS]

Love your dually.

 

[BHBurban]

Gregg, I know there are 3 sets at my buddy's junkyard. If you don't find any by this weekend I can pick you up a set.

Dave, Just go ahead and pick them up, as long as they are reasonably priced, and clean. I have noticed that the buckets that the lamp sits in is prone to rusting where the lower adjustmet screws sit, so just look out for that.

I really appreciate it.

Thank you,

 

[88GMCtruck]

No problem.

I've never seen a set rust here. For whatever reason we don't get the rust everywhere else gets.

 

[88GMCtruck]

Got a set of 88 adjusters for ya.

I never realized that 88 and 89 are different. The 88 has 2 screws on each retainer and 2 tangs on the sides, The 89 buckets have 2 screws on top and 2 screws on bottom. The 89 style appears to require grille removal to swap a headlight out...

 

[BHBurban]

Got a set of 88 adjusters for ya.

I never realized that 88 and 89 are different. The 88 has 2 screws on each retainer and 2 tangs on the sides, The 89 buckets have 2 screws on top and 2 screws on bottom. The 89 style appears to require grille removal to swap a headlight out...

Cool! just pm me and let me know how much shipped to 10956

Thanks!!!

 

[88GMCtruck]

No problem.

I have to wait till they tell me the price, I was there afterhours and didn't get one. I'll get back to you this week once I get a box etc etc.