Moleman
I'm Awesome
Right now j have the tcc hooked up to engage in 4th gear only. I only want to hook it up to a toggle switch then unlock when the brakes are applied. I mostly understand how to hook it MOSTLY.
So you hook the tan wire with the black stripe up too the switch then run the purple wire too the fuse block. Then jump the wire from the toggle switch to the brake switch. That doesn't sound right to me.
I was thinking about jumping the A and F pins on the aldl connector with the toggle switch if that will still work. But I'll go either I don't really care. I'm just tired of downshifting into 3rd.
So you hook the tan wire with the black stripe up too the switch then run the purple wire too the fuse block. Then jump the wire from the toggle switch to the brake switch. That doesn't sound right to me.
I was thinking about jumping the A and F pins on the aldl connector with the toggle switch if that will still work. But I'll go either I don't really care. I'm just tired of downshifting into 3rd.
Last edited: