2wd lift options ?

[RATFOOD]

Don't bother with 3/4 ton coils. You'll get an inch of lift at the most. Rough Country makes a 2" lift spring for these trucks. That's what I have.

Is that the kit with the ball joint spacers?

 

[95C1500]

Is that the kit with the ball joint spacers?

yes it is. You can buy just the springs though. I've seen them at www.rockymountainsusp.com

 

[Steve's Chevy]

6" lift for 2wd really?
http://www.rockymountainsusp.com/li...500-pickup/1988-98/10-41292-rc.html?c=216&i=0


I wonder how Good this kit is and if it's even available

 

[95C1500]

That's expensive. I'd rather spend less thana grand on the 4" RC spindles and a 2" body lift

 

[Steve's Chevy]

That's expensive. I'd rather spend less thana grand on the 4" RC spindles and a 2" body lift

I spent that already on my 7.5 Fabtech kit.... kinda miss the lift, but not sure I miss it that much... I could get the 6" lift with a set of springs and upper control arms for $500

But that just leads to bigger meats and MO money

 

[95C1500]

whar happened to the 2/4?

 

[ThePlague]

I have the 4in RC spindles i still want 2 more inches for a total of 6inches of lift in the front. body lift is cheap and easy, but im not a body lift person. the 2in lift spings seem to be what ima look into.

 

[Steve's Chevy]

whar happened to the 2/4?

Oh ya, I forgot about that haha