Irfangnosis
Newbie
I have a C1500 with frame rust at the very front, in front of the steering box. I can cut steel for something this small but I have guy nearby parting a k1500. Is the very front of the frame the same, similar or very different?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I’m not 100 percent sure on the gearbox area. I do know the upper control arm mounts are different 2WD on top and 4wd on side of frame.I have a C1500 with frame rust at the very front, in front of the steering box. I can cut steel for something this small but I have guy nearby parting a k1500. Is the very front of the frame the same, similar or very different?
I’m not 100 percent sure on the gearbox area. I do know the upper control arm mounts are different 2WD on top and 4wd on side of frame.
Depends on how far a little bit is. You can see it get your tape out and phone camera. Bumper mounts the same right?