https://www.belltech.com/products/belltech/lowering.html?p=4I find the lower shock extensions at Belltech...but not the upper extensions...
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
https://www.belltech.com/products/belltech/lowering.html?p=4I find the lower shock extensions at Belltech...but not the upper extensions...
Beautiful truck, I have the same one, one year older and one province to the east. I'm jealous of how clean yours is.
Do you think a c-notch is necessary if a guy isn't hauling anything?
why the djm spindles with the beltech kit rather than an entire beltech kit?
thanks for the idea about ovaling the pipe. I worked on it last night and it’s 95% there. Almost got the exhaust figured out. Turns out the culprit to why the exhaust wasn’t fitting was the upper shock relocation mounts.Oval that pipe where it goes over the rear axle. You can gain an inch of clearance, and so long as you keep the transition smooth you won't lose any flow.
Beautiful truck!