SmittySS
I'm Awesome
More UPDATES!
I have my Alternator bracket fab-ed up, and installed.
I sourced some more Junk Yard parts also. I found a diesel Suburban in the local yard, I'm going to see if I can use the GM air filter box, and I was able to get the Left to Right battery cable off of that Suburban too.
Also received the Tach Adapter and the US Shift Quick 4 Trans Controller! When I purchased this Cummins, it still had the wire harness. It looks like I should be able to use the factory 92 Dodge TPS for the Trans Controller, and I'm hoping I can use the Crank Position Sensor for the Dakota Tach Adapter.
Spent a few minutes sorting out the wiring on the truck last night, I need to cut down on the amount of now unused wires. It's a bit tedious, I feel like just cutting it all out and starting over. At the same time, I really don't want to get to a point where I cut a wire I shouldn't have.
The original wire harness running down to the trans is obviously in the way though.
Smitty
I have my Alternator bracket fab-ed up, and installed.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
I sourced some more Junk Yard parts also. I found a diesel Suburban in the local yard, I'm going to see if I can use the GM air filter box, and I was able to get the Left to Right battery cable off of that Suburban too.
Also received the Tach Adapter and the US Shift Quick 4 Trans Controller! When I purchased this Cummins, it still had the wire harness. It looks like I should be able to use the factory 92 Dodge TPS for the Trans Controller, and I'm hoping I can use the Crank Position Sensor for the Dakota Tach Adapter.
You must be registered for see images attach
Spent a few minutes sorting out the wiring on the truck last night, I need to cut down on the amount of now unused wires. It's a bit tedious, I feel like just cutting it all out and starting over. At the same time, I really don't want to get to a point where I cut a wire I shouldn't have.
The original wire harness running down to the trans is obviously in the way though.
Smitty
Last edited: