Truckracer
Newbie
- Joined
- Jun 13, 2015
- Messages
- 23
- Reaction score
- 4
Truck has always been perfect until a week ago. Took off for town and the trans was in second gear and then started shifting between second and first, rapidly. I slowed down some and then it just went to second and stayed, limp mode I assume. no check engine light, no codes with my scanner (which I'm not sure can see transmission codes). Did a little research and talked with a transmission guy. So, at this point I've changed the fluid and filter, both shift solenoid's, TPS, and both speed sensors.
It's no longer in limp mode - it just starts out in second, then shifts erratically back to first or to third no matter the speed or throttle input.. I'm about ready to burn it down...
Truck has 121,000 miles on it. Fluid and filter looked great - nothing in the pan at all.
It's no longer in limp mode - it just starts out in second, then shifts erratically back to first or to third no matter the speed or throttle input.. I'm about ready to burn it down...
Truck has 121,000 miles on it. Fluid and filter looked great - nothing in the pan at all.
Last edited: