More progress today. At this point it probably only needs one more day to finish everything up to drive it! We actually were only out there for four hours and got quite a bit done! I spent a good period of time cleaning today as well. The other two did pretty much everything else.
Cleaned the TBI, installed new header gaskets, installed all of the engine accessory brackets, paired the SM465 to the 350, installed the dust shield, installed the oil filter adapter, etc. A few little things! Here it sits ready to be installed.
You must be registered for see images attach
And it's in the truck! Installing the combo was much easier than pulling the combo out. Kyle started reconnecting wires and the motor mount bolts and then we had to leave so I could attend my father's birthday dinner.
You must be registered for see images attach
I figured it would be a good time to grab a sharpie and cardboard and made a list of to-do. I actually found the nail in the glove box of the truck!
You must be registered for see images attach
Not bad I think for 4 days of working on the truck and two of those days were half days. On Saturday I'll go back out there and hopefully button everything up, check everything, and go for a test drive. The one thing I do have to sort out is a starter, Tyler had one from Napa that didn't work so I'm going to take that in and get a replacement and then my truck will start!