1989 body seam molding

[Hipster]

Driver side missing... pic..

Looks like it's had a cab corner and or rear cab panel and it's been seam sealed and painted over. It's not that you're missing a molding.

 

[Hipster]

seam sealer can be hard to duplicate but that's messy.

 

[FullBlowncustoms]

Looks like it's had a cab corner and or rear cab panel and it's been seam sealed and painted over. It's not that you're missing a molding.

NO !!! it is missing the seam molding strip. The pins are on the cab.. JUST like the passenger side is.. But the pass side is on there.

 

[FullBlowncustoms]

I seen it on a 90 step, but it was brittle, slide it up off and would chip etc..

 

[FullBlowncustoms]

seam sealer can be hard to duplicate but that's messy.

it is not seam sealer... It is a part.... Just like the short roof one..

 

[Hipster]

NO !!! it is missing the seam molding strip. The pins are on the cab.. JUST like the passenger side is.. But the pass side is on there.

Holy crap man show me a picture where if it has pins to accept moulding clips between the cab corner and bedside because in 35 years of doing collision work on these trucks including working for Gm when they were new not once I have seen an oem molding there similar to what is present for the roof line.

 

[FullBlowncustoms]

https://www.classicparts.com/1988-9...J4jHEaX3XayE2aafiQj--jtBDBr8mU7hoCkEMQAvD_BwEIt's a part like the roof one..

 

[Hipster]

I seen it on a 90 step, but it was brittle, slide it up off and would chip etc..

(1988-98) Roof Joint Molding, This is what your link provided. Ther is no OEM molding for that area that I have ever seen.​

 

[FullBlowncustoms]

Crap, sorry.... But there are pins about every six inches. Truck is in storage for winter. But you can see at arrow it has them sticking out. Does the roof ones have pins?

 

[FullBlowncustoms]

Hard to see, but two at top also. The white ya see is old wax. pic from when I bought the truck