12v switched power, where do I find it

[asolek88]

Wheres the best place on the inside to pick up 12v switched power. I am wiring a nitrous arming switch.

 

[Greg]

http://www.gmt400.com/forum/showthread.php?1865-a-small-addition&highlight=switch

http://www.gmt400.com/forum/showthread.php?190-where-d-yall-mount-toggle-switches&highlight=switch

http://www.gmt400.com/forum/showthread.php?1649-switch-panel-ideas&highlight=switch

the 3rd link even has a link to the 2nd link I gave you.

 

[asolek88]

I am wondering where everyone is pulling power from? Is there a common place everyone is using?

 

[Tony_SS]

Bump.. I need to run a wire to somewhere that is switched 12v... can I go right to an open fuse slot or is there a good wire to tap into??

 

[Swims350]

look under the dash where the relays and such are and find you a switched hot terminal that you can use a male end on. if not tap into the radio or something.

 

[MOBS]

Any circuit(device like turn signals for instance)that doesn't operate/have power while key is off is seemingly what you're aiming for.

 

[capricefrk013]

Under the dash there will be a ********* Molex plug. Look for thick pink, if you want an ignition, or use the thick brown for an accessory.

 

[Tony_SS]

Thanks.. I think I'm going to tap onto the radio or amp turn on lead...