evilunclegrimace
Does not always play well with others
Does any one know the part number for the intake valve seals for the 810 head? The valve stem is .375, fel-pro and Summit racing were no help. They are the perfect circle style.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
All of them list seals for 11/32 valves.Mahle, TRW, Victor Rienz, GM performance parts
I am not spliitng hairs, .375-.343= .032. There are .375 exhaust valves in this set of heads. Go ahead and try to get a set of .343 seals on a .375 valve,or, try a set of .343 valves in a .375 guide and see how that works for you.11/32 = .3438
A 1/12 inch difference, either your splitting hairs or I'd ask the head / valve supplier.
That is supposed to read EXHAUSTDoes any one know the part number for the intake valve seals for the 810 head? The valve stem is .375, fel-pro and Summit racing were no help. They are the perfect circle style.
Yeah I was typing faster that my brain was working. I have those for my INTAKE valves. I needed the seals for my EXHAUST valves. Some times I wonder if I should leave the house at all.These show the application for 5.0 and 5.7 TBI heads but, for .344" valve stem. I wonder if someone modified your heads so the bigger stem would work with bored out guides?
www.summitracing.com/parts/FEL-SS72527
Fel-Pro SS 72527 Fel-Pro Valve Stem Seals | Summit Racing
Free Shipping - Fel-Pro Valve Stem Seals with qualifying orders of $109. Shop Engine Valve Stem Oil Seals at Summit Racing.www.summitracing.com
Edit: I used these on my Summit Racing heads - again, 11/32" stems.
Well, you did say exhaust valves in the 3rd post, ha ha. My Summit Racing heads used the same seals for both so, I can't help you thereThat is supposed to read EXHAUST