Search results

  1. Chevy8697

    DD install with custom made bezel (95-99)

    Dipping my arms in carbon fiber with MyDipKit - D…: http://youtu.be/DgEjrtBprlo
  2. Chevy8697

    DD install with custom made bezel (95-99)

    Did you dip that yourself? I'm in the process of doing the same thing and I'm trying to figure out how much film I need
  3. Chevy8697

    Ignition switch failure?

    I'll be giving that a try first thing tomorrow thanks!
  4. Chevy8697

    Ignition switch failure?

    Hi all so i need a little help diagnosing an issue with my brothers truck. About a month ago we installed theft alarms in our trucks. His is a 98 k1500 with passlock mine a 97 without.. both installs worked fine minus remote start for his because we need a module. Anyways. Yesterday on his way...
  5. Chevy8697

    Heater controls.

    Okay im looking for an electronics guru to try to help me out here. I want to pull apart the hvac controls and build them on a breadbox so i can mount the hvac knobs in my ohc and have the actual hvac controller still in the dash. If anyone is willing to help It would be greatly appreciated...
  6. Chevy8697

    94Sierra4x4.. upgrade to 97SilveradoZ71

    Those look sick! Deff doing mine now. Did you spray it on or roll on?
  7. Chevy8697

    Progress and and a loss of progress.

    Im just trying to decide on a color. If you can post a link then to that pic.
  8. Chevy8697

    Progress and and a loss of progress.

    Yea my insurance is gonna go up somewhat. I dont think it was that high of a percent. It still sucks though. As of now no the fender flares are not bedlined. Just flat black paint. After I get my lower body work done im bedlining from the trim strip down and the flares will be getting lined...
  9. Chevy8697

    Progress and and a loss of progress.

    I never realized how f***ing big the front frame on these were until that accident. These things are tanks!
  10. Chevy8697

    Progress and and a loss of progress.

    When I put that pushbar on I didnt think it would do a whole lot being mounted to the bumper but after that accident I took those words back
  11. Chevy8697

    Progress and and a loss of progress.

    Well after the accident I didnt wanna go back to stock I really would have liked a nice billet grill but I couldn't find any that I could settle on.. I have a few ideas to make the grill look a little better down the road. But thanks guys I really appreciate the positive feedback!
  12. Chevy8697

    Progress and and a loss of progress.

    Plans are to either hydro dip the push bar or paint it to match whatever color I rhinoline the bottom of my truck.
  13. Chevy8697

    Progress and and a loss of progress.

    So i've been gone for quiet some time here. No sure who all remembers me. Anyways im to the point now where im content with my truck so i figured ill share my progress. Sorry for the giant pics. What i started out with. Stock high 340xxx miles. 2 months later i put a light bar on it...
  14. Chevy8697

    Torque app for android.

    im waiting for my usb obd adapter. im mounting my 8 inch tablet where the old cd player goes then mines gonna flip down.
  15. Chevy8697

    Torque app for android.

    You can add sensors in torque but im not sure if there would be a sensor to add and im not sure where to even start looking for it
  16. Chevy8697

    Torque app for android.

    The fuel gauge works on mine. But it is a pia you have to go to your vehicle profile and set your gas tank to full. Then you have to clear your records for the dials.. I use the est miles to empty too but you have to do the same thing. Resets and all. Only accurate if you completely fill your...
  17. Chevy8697

    Fender flares.

    All I have right now are the rims but the guy I bought them from showed me a picture of them on his obs hoe.. He said they stick out 2 inches.. They are american racing outlaw 2 rims. Sent from my 5.7L beast machine
  18. Chevy8697

    Armrest won't open

    Mine does it too. The foam on mine started to come off the top part of the rest. I didn't think that was the problem but I glued it back up and I'm not having the issue anymore. Sent from my 5.7L beast machine
  19. Chevy8697

    Fender flares.

    Okay guys so I bought some new wheels for my truck but they stick out past my fenders so I'm getting flares.. I want some opinions on this.. I plan on rhino lining the body from the trim strip down. These are what I've been thinking on doing so far. I was thinking of doing the body in rhino...
  20. Chevy8697

    New Guy in Pa.

    Good to know man maybe we will meet up sometime. Sent from my 5.7L beast machine
  21. Chevy8697

    What have you towed lately

    I hauled half of a ford Econoline today 2200lbs wooo wish I would have taken pics too damn cold though Sent from my 5.7L beast machine
  22. Chevy8697

    Torque app for android.

    Sadly no. There are alternatives with a laptop but None that I know works with a smartphone Sent from my 5.7L beast machine
  23. Chevy8697

    Torque app for android.

    https://www.youtube.com/watch?v=3lcGjdDWKGI&feature=youtube_gdata_player. Well there's the video.. Just an FYI with this app the horsepower and torque are only accuarate when going from a dead stop and if you spin the tires its Inaccurate.. Gotta love pa we still have ice on our roads so...
  24. Chevy8697

    Torque app for android.

    Before I had it in my truck 8 have it In a buddy's corvette and his gauges readout mpgs this app matched what his corvette was showing. And these trucks from what I've seen average 16ish.. That's what I normally run around 16-18 when I'm running at 50 mph.. Just remember vehicle profile is...
  25. Chevy8697

    Torque app for android.

    OK I have a HTC rezound.. But I've used it on plenty of phones. I have a elm327 adapter. It has a blue and orange sticker on it. Its roughly four inches long.. There's no brand name on it that I can see so that's the only way i can describe it.. I'll take a pic when I go back out to my truck...

Latest posts

Staff online

Members online

... and 26 more.
Total: 1,371 (members: 76, guests: 1,295)

Forum statistics

Threads
64,869
Messages
1,402,059
Members
52,649
Latest member
sredwine

Share this page

Top