Search results

  1. 2doortahoetoby

    Engine Rebuild Torque Specs

    I honestly didnt even look up service manuals, which is my fault. When it comes to looking up stuff for motors, I lack in that aspect LOL. I was just searching for 350 engine rebuild torque specs, and all these janky websites were showing me different numbers for EVERYTHING. It's not that I...
  2. 2doortahoetoby

    Mirror Disassebly

    Honestly, taping up the lens would be your best bet. I never fold my mirrors in, so personally i wouldnt worry about that part looks like (Good chance paint rubs off from inside of there anyway), and my friend junked both lenses on a replacement set of mirrors trying to take the lens out...
  3. 2doortahoetoby

    Engine Rebuild Torque Specs

    I have been searching across the internet trying to find torque specs on all the motor internals. I have a spare motor completely stripped to the block and I am installing all new parts. I have been finding a mix of numbers on the internet for torque specs, and can't seem to find reoccurring...
  4. 2doortahoetoby

    Best 5.7 Vortec Long Tubes

    Makes sense. Summit has a cheap long tubes. Gonna most likely run them. Will probably do the VHT/ceramic coating on them myself. Sadly it won’t be pretty stainless steel, but just balling on a budget!:33:
  5. 2doortahoetoby

    Best 5.7 Vortec Long Tubes

    Does anything else have to be done for them to work on a 5.7 vortec?
  6. 2doortahoetoby

    Best 5.7 Vortec Long Tubes

    I’m sure this has been discussed before, but I see a lot of back and forth of arguing with header recommendations on the threads, LOL. Looking to purchase a set of long tube headers for my 5.7 vortec. I will be doing an EGR delete to broaden my choices for long tubes. Obviously I can’t narrow...
    • 2doortahoetoby
    • Thread
    • exhaust headers long tube headers long tubes vortec
    • Replies: 6
    • Forum: Exhaust
  7. 2doortahoetoby

    Best choice for MPFI

    I bought the one from autozone. The MPFI one. Yes it was $330ish, BUT it was a Delphi part when I opened the box. I was very glad to see it, and it definitely made my Tahoe run so much better.
  8. 2doortahoetoby

    Motor Rebuild

    What is a 411 swap? And I have the 5.7 vortec
  9. 2doortahoetoby

    Motor Rebuild

    My Tahoe is a 99, and I reached out to a friend of mine and I was told the dyno guy has the software to tune a 5.7 vortec. So he’d probably get a better tune than black bear since he could see everything right in front of him
  10. 2doortahoetoby

    Motor Rebuild

    Yes I’m looking for a cam classified as a “daily/street” cam. That’s usually the RPM range I keep an eye out for, just a lot of stuff I don’t understand when reading other things about cams
  11. 2doortahoetoby

    Motor Rebuild

    I’ve read a lot about black bear tunes, that they seem to be the holy grail for these trucks; however, there is a local guy who does a lot of dyno tuning that gets a lot of praise around where I’m from. Might start with black bear just because they’re a more reputable brand, and because there is...
  12. 2doortahoetoby

    Motor Rebuild

    Well I just don’t want a cam that is tailored for drag or something on hard acceleration and straight line driving. Just better daily performance, along with better power put to the ground
  13. 2doortahoetoby

    Motor Rebuild

    I am a newbie with motor work! So I was hoping to find some information on a cam kit that I could install and not mess with anything as far as installation goes
  14. 2doortahoetoby

    Motor Rebuild

    I’m looking to rebuild a spare motor for my Tahoe. My current vortec motor has 243k on it and leaks oil everywhere. Looking to do a cam kit on it. I have a 98 vortec motor was going to use my new Delphi MPFI spider on it for just simplicity, drivability, and to keep the cost down. Anyone have...
  15. 2doortahoetoby

    Installing 3 Inch Diff Drop

    By lowers, I mean lower control arms
  16. 2doortahoetoby

    Installing 3 Inch Diff Drop

    I recently took my Tahoe to an alignment shop and I was told it was lifted in correctly. I do have my keys cranked quite a bit to clear my wheels, and I have bigger CVs to handle the angle and forged RC 2-3 inch upper control arms (only works on 2-3 inch lift kits), but my lowers and tie rods...
  17. 2doortahoetoby

    Best choice for MPFI

    Long time viewer and reader of the threads here but I just want any possible new ideas or information on the topic. I know a lot of people recommend the mpfi conversion, and I have been needing to put a new spider in. I have been having a misfire code that won’t go away. I did my intake gaskets...

Latest posts

Members online

... and 12 more.
Total: 1,844 (members: 62, guests: 1,782)

Forum statistics

Threads
64,545
Messages
1,396,262
Members
51,958
Latest member
A Plus Woodshop

Share this page

Top