Search results

  1. N

    SAS Draglink length

    I'm doing an SAS on my 94 k1500, I ordered my cross over and highsteer kit from Northwest fab (Canadian) as they make a wicked kit with incredible parts and the beffiest setup in the industry and they are 3 hours from where I am. They also beat ORD by 90$ on price before conversion. The rest of...
  2. N

    EGR problems

    My truck has a wicked bad bog at idle speed, and it lopes when idling cold. I have determined that something in the EGR system is the problem. when I unplug the vacuum line to the EGR valve the truck runs awesome, leading me to believe that the solenoid is allowing the valve to see vacuum at...
  3. N

    Offroad Design Shackle Flip

    Gentlemen, who has a ORD flip kit in their truck? I want to see some GOOD pictures of them installed, maybe with a tape measure in the photo :hmm: I want to fab up my own which lift less in the bracket and run a longer shackle. my grand scheme being as much flex as possible as my IFS front only...
  4. N

    Parking brake problems

    I just finished a 14 bolt semi floater swap into my 94 half ton that had a 10 bolt. I finally got it all installed and my rear drums are dragging. Not enough to lock wheels up but enough to barely let it roll down my driveway. The wheel cylinders are new. The brakes have been bled. I'm...
  5. N

    Shackle Flip kits (and related RCX problems)

    I have a 94 k1500 on a 6" RCX lift, I have the add-a-leafs and block in the rear, I'm looking to maybe run an ORD shackle flip and ditch the block, what are your guy's experience with shackle flips for daily driving purposes, and more importantly for wheel travel, I do not want to loose...
  6. N

    1994 Smurf

    My second truck, bought her in my grad year at highschool. Got her with 120,00kms on it, zero rust. no abuse, Total cherry! And the same age as me! Looked lame as heck when I bought it, figured it would never be coool, but I'm happy with it now Custom Workboxes, headache rack, winchbumper...
  7. N

    Question about axels down south

    Hey guys what part of my RPO code tells my gearing? I want to know where I am.I put 33's on my truck and it sucks now so Im thinking about re-gearing my truck. I'ts a 94 1500 5.7L. and whats the easiest way to gear my rig down a bit? and whats it gonna cost roughly? and know that this site is...
  8. N

    Intermittent Engine High Idle

    Hey guys, Been having some issues with my 94 chevy k1500 4x4, 5.7L The truck idles REALLY high sometimes. I will start it and it will idle in the "choke" when its cold at roughly 1000rpm. it will then idle down as it warms. That's all as it should be. But I've been having problems with it...
  9. N

    Bumper question,

    This is the "body section" so I guess this goes here. Quick question, the three big bolts which hold the front bumper brackets to the frame, are those nuts welded inside the frame? Its a box frame and doesn't look like I could get a wrench in there to hole them 1994 k1500 chevy 5.7l
  10. N

    CLEAR ANSWER: Alternator Upgrade.

    I want to possibly upgrade my alternator/ charging system. I run 4 HI-mod, and 4 hella 500's, and a 300W sub amp and 4 cab speakers on 55w deck power. Today while bombing down a dirt road (35 minutes) running everything full blast all lights on, I noticed that my charging system coudnt keep up...
  11. N

    OLD 6" fabtech lifts

    Hey guys, buddy of mine has a 6" fabtech spidle lift on his truck, he is planing to SAS the truck at some point, This is when I might beable to get ahold of his lift and put it in my 94 ecsb. Can these kits de decranked to 4" like the RCX or cepeck? Id only be running 33's on my truck and dont...
  12. N

    HOW MUCH TIRE CAN I STUFF?

    Hey guys, just scooped a set of 285/75R16's on silver steel's for 80$, the tires are worn out but im considering recapping them with a really meaty tread patern since my local shop can do it. So my question is can I stuff a 285/75R16 with a tall cap on it into my stock 94 1500's wheel wells...
  13. N

    4x4 Doesnt work.

    I have a 94 1500 ecsb wiht a 350 TBI, shift on the floor transfer case. Today while hunting I lost my 4 wheel drive, It worked fine most of the morning but stoped working in the afternoon and hasnt since worked. I am fairly certain that the transfer case is shifting since 4lo causes the truck to...
  14. N

    ALL RCX lift owners LOOK!

    Im going to be purchasing a 6" RCX lift within the next couple months, I have the whole thing pretty much planned out as to how it will go, except what I will do with the drivershaft/exhaust cross pipe clearance? How is it done on other RCX trucks? Im not running duals! as I just put in a...
  15. N

    Rebuildable shocks?

    Hey guys. I Plan to be putting a 6" RCX lift in my truck this summer. ( but without the AAL and decranked till level) I was wOndering what I'd be looking at for shock options? I would buy the kit with shocks (comparison purposes) and I'd maybe look into getting a second "better" set. I'm...
  16. N

    HID? Help me!

    I just completed the 4 hi mod in my truck as well as installing a set of PIAA fogs. The fogs are disappointing to say the least :( they spread and fill the ditch nice buy only like 20ft out from the truck. So naturally I want to try retro fitting HID's into them. Does anyone know how much...
  17. N

    Winch setups!

    I want to put a winch in my rig eventually. Can you guys post pics of you winch setups? Also how big doo I need on a 1500 4x4 (of course). 8000lbs? Too much too little?
  18. N

    Bunch of lift questions.

    #1 if I have a shifter on the floor do I have "autotrac" and need the new drive shaft? #2 can you still get cepek lifts? And. Or importantly can I get one into Canada? #3 I want to use torsion bar replicator when I do lift, will I then use the stOck torsion bar locating crossmember...

Latest posts

Members online

... and 15 more.
Total: 2,188 (members: 65, guests: 2,123)

Forum statistics

Threads
64,562
Messages
1,396,713
Members
52,025
Latest member
Benhall27

Share this page

Top