Search results

  1. F

    Astro van dash swap

    I'm not sure about the width, but I imagine it's fairly close. Would have a stock appearance, and be pretty unique. But I can't find where anybody has done it.
  2. F

    Astro van dash swap

    Has anybody ever looked at installing an astro van dash in a 95+ truck? The center portion of the astro dash wraps around a bit, seems like it would be a cool swap. Pic of the dash I'm talking about can be seen here. https://consumerguide.com/used/1990-05-chevrolet-astro/ Thoughts?
  3. F

    Which ls?

    Goodie. Okay perfect thanks!
  4. F

    Which ls?

    Up north? You could say that. I live in saskatchewan. 40 below is not uncommon. I looked for stroker52's build. Couldn't find much. I think I'm leaning more towards the aluminum block, simply because of the mildness of my build, and the fact that it'll be a weekend offroad, maybe not street...
  5. F

    Which ls?

    Okay. That's good news. I'm sure I would be happy with 400 horse. All it will be is a bare bones, reliable as heck, hunting and mudding machine. A little lift and a nice set of tractor tires for the v bar treads. My next question is, aluminum block or iron? For my mild build, which would suit...
  6. F

    Which ls?

    So I was looking into swapping an ls into my 1992 chevy half ton. My goal was around 450 hp. Nothing crazy but something extremely quick. Here are my options: iron block 6.0 for about $2600. Naked engine, no alt, starter etc. Aluminum block 5.3 for $875. Same naked engine. Iron 5.3 is same...
  7. F

    The Stupid Interior Questions Thread

    I have a question about the cab construction. I want to put a gun rack behind the rear seat(ecsb). When you pull the seat forward, there is a perfect area to put a gun. I'm wondering if I can put small self tapping screws through the back wall. Or will they go straight through to the exterior...
  8. F

    To swap or top build?

    Okay, so after some more research, I think I've decided to integrate the nbs PCM as minimally as possible. Ie) only running the engine and trans. Keeping the original PCM controlling abs, tach, speedo lights signals etc. when doing this, I realize I will need to supply the nbs PCM with the data...
  9. F

    To swap or top build?

    So I've been compiling a list of parts I'll need. From donor truck: Engine Tranny Transfer case??? Ecm??? All wiring on engine side of firewall Intake and maf A/c system Alt. Any other little goodies. Out of catalog.: Nelsons harness (not sure about nbs or obs ecm) Motor mounts A/c mounting...
  10. F

    To swap or top build?

    Well I've definitely got a deal on one. Its a sweet combo? I'm not 100% sure. I've been looking into exactly what I need. Looking like the 411 ecm, the engine tranny and all the associated goodies like intake exhaust manis etc. That nelsons stand alone harness is where I think ill go. But the...
  11. F

    To swap or top build?

    Hi all. I've got a 1997 gmc sierra with 257000km. It's getting tired and has the infamous intake manifold gasket leak. Dumping coolant into the oil. So here's my question. I would like to know which would be the better option. A) build the 350 up a bit. Bore it out, new pistons, head job, cam...
  12. F

    700r4 and 4l60e compatability

    Would it matter though? The tcase will be from the 1992. As long as the truck has a speedo now, I wouldn't change it. Just put a transfer case on the back. Or is there something i'm forgetting?
  13. F

    700r4 and 4l60e compatability

    Thanks! Let me clarify. The donor truck has the 700r4 and it's 4x4. The 4l60e is in the new truck. It's gonna stay there. My goal is to use the tail shaft and rear housing from the 700r4 and install them, along with the transfer case, onto the 4l60e. Basically turn a 2wd 4l60e into a 4x4 using...
  14. F

    700r4 and 4l60e compatability

    So ive been looking at a wicked deal on a 1995 1500 rcsb 2wd. I hate 2wd trucks. I have a 1992 ecsb 4x4, but the motor is pooched and it has major wiring harness damage/bad wiring from previous owner. Basically what i'm asking is how difficult will it be to swap 700r4 4x4 parts to the 4l60e? I...
  15. F

    Starter issue

    Still looking... Here's a video, maybe somebody can help me locate it... I feel so stupid. Lol
  16. F

    Starter issue

    I can't find it to save my life. Thought it was for the rear of the engine, but couldn't find any plugs back there...
  17. F

    Starter issue

    I think i may have found the source of my problems. I found this, unplugged. Should be simple, plug it back in, right? Problem is, I don't know what it's for. It's got heat reflective tape around it, and it's locking tab has broken, and it was "fixed" with high temp gasket maker. I was thinking...
  18. F

    Starter issue

    Well I had a buddy come out, he works at an auto repair shop. He said it was running extremely rich. And that I should check my fuel pressure reg. One injector is pumping out a little more fuel than the other... His rational is that it's getting so much fuel, it's flooding at idle, but when it...
  19. F

    Starter issue

    I guess it's possible. I dont recall it moving at all. I hope I dont need to mess with timing, because it has an rv cam I forgot to mention. The thing is, it sounds good at higher rpm. Past 3000, it sounds fine, it's just getting there that it spits at me. Firing up the intake indicates...
  20. F

    Starter issue

    Well, I put it back in, and it spun the motor over just fine. WTF! I'm not complaining, just sayin. Now, back to the problems I had before it wouldn't turn over... It starts, and idles fine, but doesn't sound all that great. I don't have an experienced enough ear to tell what's up, but it...
  21. F

    Starter issue

    Well, the starter spun... Not what I was hoping for. So I'm hoping it's just the relay now. What else could it be? It doesn't work with the remote start either...
  22. F

    Starter issue

    So, my truck quit turning over. So I pulled the starter, and tried to hotstart it. I hooked the black wire up to the post that goes into the starter, and the power up to the little post. The starter gear would pop out, but would not spin. Should I get a new one (autowrecker) our get this one...
  23. F

    A series of unfortunate events

    Well I went out to the shop today, and it still won't turn over... I'm guessing I need a starter. I'll have to get that figured out first before I can even start with the misfiring issues.
  24. F

    A series of unfortunate events

    Yes, I then replaced 7 of 8 (couldn't get to the passenger rear one) and the problem persists.
  25. F

    A series of unfortunate events

    Well, I tried switching the front two back and forth, and it didn't seem to make a difference... And I did notice a slight difference in the amount of fuel being injected between the passenger and drivers side injectors. But what are the chances that happened while I was pulling the plug. Maybe...

Latest posts

Staff online

Members online

... and 2 more.
Total: 1,473 (members: 52, guests: 1,421)

Forum statistics

Threads
64,729
Messages
1,399,538
Members
52,308
Latest member
mossbuddy

Share this page

Top