Search results

  1. kevhill85

    TX FS/FT Impaka SS wheels

    Looking to sale for $600 or trade for something else.. 17x9.5 5on5 Trade would have to be local.
  2. kevhill85

    DJM lower control arm changed for bags

    As the title says . Looking to see and hear Input on making my DJM arm bag ready . FYI I have the upper and lower DJM arms right now .
  3. kevhill85

    Ss454 Chevy truck wheels

    A buddy has a set of ss454 wheels he want to sale .. $500.00 with wheels and tires . His email [email protected]
  4. kevhill85

    What are these DJM spindles for

    I am trying to install new bearing on my 1990 Chevy truck. I have found out that I can not find a inner wheel bearing to fit on these spindles. I have attach some pics . I have try two deferent bearing and none of them fit flush all the way back. I have never seen anything like this. HELP...
  5. kevhill85

    Looking for stock hangers for a 1990 Chevy

    As the title states . I am looking for stock leaf spring hangers ..
  6. kevhill85

    Looking for headlights kits

    Where are you guts buying your new head like kits? On ebay I an seeing a lot of crapy feedback for sellers. I am looking for a kit for my GMC truck
  7. kevhill85

    Pick another truck

  8. kevhill85

    20's centerline wheel for sale

    20x8.5 centerline stingray wheels One rim has bend but still holds air and runs straight. 450.00 or will trade for some 5lug Chevy wheels
  9. kevhill85

    I need of a motor for my gmc

    I Am in need of motor a for my 95 gmc truck.. Looking for a 350 or 4.3 .. [email protected]
  10. kevhill85

    88-98 rear axles w/G80

    I have a rear axles from my 96 2dr 2wd Tahoe. The rear axles was replaced for a 6lug axles . List of specs 1) G80 factory positraction unit 2) 3.42 gears 3) drum Brakes [email protected] $300.00 obo.
  11. kevhill85

    5.3 bored yo a 347 or 383

    Just want to state the is upfront . I know what the 6.0 blocks can do and the cost of them( cheap). I have one and I will build the 6.0 later.. Ok I have been reading about the 5.3 block being bored out to an LS1(3.90 bore) and being able to handle the upper horse power add on better. I am...
  12. kevhill85

    TX-BL E-REVO

    Ok ,guys here what I have. I am asking $500.00 plus shipping or trades E-REVO parts and upgraded are listed below 1) alum GTR shocks 2) sway bar kits 3) proline tires 4) 2 2s LIPOs batt 5) 2 body's 6) whole lot of new part not list and parts I can throw this in for the right...
  13. kevhill85

    OBS part for sale

    I will take trade for LS part and parts for my 2dr Tahoe ect........ 1). Center Console from a 2 dr Tahoe blue. $75.00 +shipping 2) over head console $45.00 +shipping 3) 4 6 lug 16x8 rallys with center cap and rings $100.00 4) set of 350 voetec heads $250.00 plus shipping 5) Holley 750...
  14. kevhill85

    aftermarket wiring harness for lsx motor

    Who makes the best aftermarket wiring harness for my 5.3/4l60e trany. I have two factory wiring harness. I want something that will be problem free. Here is the ecu I have
  15. kevhill85

    schoenfelds LS swap headers *** looking for measurements

    Has anyone use the Schoenfeld LS swap headers. Looking to find out how far they hang below the body of a truck or Tahoe. Mine body drop try to see if I am going to have a problem in this area. Schoenfeld LSX swap Headers http://www.schoenfeldheaders.com/LS1-TRUCK.htm...
  16. kevhill85

    FYI on DJM lowering part

    www.summitracing.com has all the DJM lowering parts really cheap until X-mass. Shipping is free and handling is $11.95 per order. I just bought my spindles and spring and they where the cheapest around with shipping and parts added together.. Link to all DJM on summitracing...
  17. kevhill85

    Kevhill85 96 2dr Tahoe build

    This project started out with a a buddy of mine and decided he would build something else. So bought this tahoe from him and hope i can take this truck to the next level. I have been wanting to find cheap 2dr 2wd Tahoe for awhile to build. At this point Rojo (my buddy) has built the frame and...
  18. kevhill85

    Good Guys show in Tx

    Just checking to see who's all going to the good guys show this weekend at the Texas motor speed way. I plan on going sat am.
  19. kevhill85

    Sad day for my 91 swb!!!

    Well guys I old my 91 truck as a roller today!!!! What do you guys think of the new truck. I wish it was stock and not bodydroped. But the bright side is I bought a 96 2dr Tahoe !!! A buddy of mine (Rojo) has done all the work to this truck at this point. He moved on to a new project. It has...
  20. kevhill85

    New roller cam for my 422 sbc

    Well guys order my new cam for my truck.what do you guys think? I don't care about gas mileage and this truck only driven on weekend and holidays.... Spec on truck 3000 stall Tci trany 411 gears 422 sbc Cam Grind Type: Mech ROLLER CAMS Application: CHEVROLET V8 57-87...
  21. kevhill85

    New toy for the Garage

    My new welder will be in tomorrow .... It's a Lincoln 180c pro. My old welder took a dump on me last week... I had a hard time picking from the miller 180 and the Lincoln 180c The new cart
  22. kevhill85

    Cachassis works Back-half for 88-98 trucks .

    Looking anyone that has Mess with these back half setup.. Looking for your guys thought on this kit... Be nice on the comments... Link to website http://www.cachassisworks.com/p-565-rear-framelow-profilewith-bends.aspx How to write on this kit in a excab truck...
  23. kevhill85

    Starting my backhalf soon

    I wanted to see what you guys think of these kits.. I was going to build something on my owen but found this today.. This look like it would make things a lot easyier.. Looking for you guys input. I want that pro street look. Photo of kit...
  24. kevhill85

    TBI to MPFI Swap Intake

    Good swap for your TBI to mpi http://dallas.craigslist.org/mdf/pts/2532500297.html
  25. kevhill85

    93 rcsb BBC 5000.00

    Man this is a good deal... http://dallas.craigslist.org/mdf/cto/2511023422.html

Latest posts

Staff online

Members online

Total: 1,328 (members: 42, guests: 1,286)

Forum statistics

Threads
64,413
Messages
1,393,452
Members
51,597
Latest member
fugly

Share this page

Top