Search results

  1. Lost06

    For once someone help mw put an end to my headlight issue

    it might be the turn signal assembly. I believe that that has something to do with the headlights not working correctly, or at all.
  2. Lost06

    Wiring Harness Question

    I used a guy in Arkansas and he made my harness so that I didn't have to have 2 computers. However, it cost about $500. I sent him the harness from my 96 and the harness and computer from the L33 i bought. He sent it back 1 harness that used the L33 computer and connected to the factory gauges...
  3. Lost06

    Tucking front wheels.

    Do you happen to know his screen name? Where I found this pic, no one knew him.
  4. Lost06

    Tucking front wheels.

    Thanks, I've got a few other pics of trucks that apprear to be daily drivers as they aren't quite as pretty as that one and one is at the drag strip doing a burn out in a water box. but they are on another computer that I can't get to right now. But even though, those wheels on the green...
  5. Lost06

    Tucking front wheels.

    btw... i found the pics of that truck on this here.
  6. Lost06

    Tucking front wheels.

    Ok. sorry for being so late with my reply. I have been busy with the family and these damn storms we have had. Here is a pic of one truck that claims to be static dropped with wheels tucked. The offset doesnt look too drastic. I plan to bag it one day when finances allow. But even then...
  7. Lost06

    Tucking front wheels.

    Before I start, I did search and didn't find anything relevant to my question. I have a 96 GMC RCSB that is lowered 5-9. My problem is that the wheels are hitting the fenders on big dips and turning after trimming the fender lip WITHOUT an alignment. If I go get the alignment it will push the...
  8. Lost06

    lsx swap headers

    i used the Schoenfeld. make sure that your engine is as far forward as it can go. mine are hitting on the passenger side firewall. I am NOT going to pull the engine so I'll use the trusty old 3lb sledge to make it fit. but they did bolt right up.
  9. Lost06

    bolt pattern.

    I was researching RPO codes on my truck and it says its a 5X4.75. I thought all full size trucks were 5X5. Did I miss something?
  10. Lost06

    wheel lean...

    I recently had the bed off to replace it with another one and while it was off it was noticable. I was hoping that the old bed was maybe deformed from an accident but even with the new bed on, it still has a lean to it. When I lowered it, I noticed that the drivers wheel tucked more than the...
  11. Lost06

    wheel lean...

    Sorry guys. I meant to say it was the back wheel. 2wd didn't have an axle section. And I figured off road guys would see this more often with the abuse they give their trucks.
  12. Lost06

    wheel lean...

    I have a 96 2wd 1/2 ton. When I look at it from the rear. It seems that the drivers side tire lean in toward the truck. Has anyone had a similar problem or have a suggested remedy?
  13. Lost06

    95 GMC SIERRA RCSB

    How's the swap going?
  14. Lost06

    low rpm

    Details are sketchy since I saw it last night. But it didn't sputter or anything. It just stopped around those rpms
  15. Lost06

    low rpm

    Hi. Before throwing stones, I did search but didn't find any info pertaining to my issue. And I need input before I buy this truck. I have a rebuit 4l60e from a 96 GMC Sierra sitting in my garage floor. I found a 97 Silverado thatneeds a transmission for $1000. Its a really clean truck and the...
  16. Lost06

    Is it dead?

    I got a complete drivetrain from an '05 Silvy. So, I am now in the process of disassembly....
  17. Lost06

    Is it dead?

    Thanks for the input guys. I am going to start shopping around for a 350 and I guess go from there. I'm hoping that something will come up and I can afford to do an LSx conversion.
  18. Lost06

    LS1 transplant

    I know you have been doing a lot of bartering and trading for the stuff you've got. But... if a guy were to do this without the luxury of trading and stuff, what do you think the cost of your set up might be?
  19. Lost06

    97 Yukon 2dr 6.0 Swap phase 1

    I am curious about your trans also. I am hoping that everything works out and I can pursue an LS conversion too.
  20. Lost06

    Is it dead?

    @ JAW's, how big cam and was it a noticeable difference in performance? I want a cam that will sound good and lumpy yet run good.
  21. Lost06

    Is it dead?

    I am hoping to put an LS motor in it. I want to up grade to something better so I guess I'll have to ride my Harley more often. A friend said that there is a place in Cali called Pacific Fab that specializes in LS pullouts and new setup's made to order. He supposedly got an complete LS1 with the...
  22. Lost06

    Is it dead?

    I was thinking a 350 might work but have read that there are some minor differences where the intake might not work and also the ecu's are different. Do you guys know anything about that? Also, what about a 383 short block?
  23. Lost06

    Is it dead?

    and what really sucks is that we have had a lot of things going on that has us pretty tight on money and I hate to put another 305 in it.
  24. Lost06

    Is it dead?

    well, it sounded like there might have been a bolt or something rattling somwhere in the engine. when i heard it i pulled over and lifted the hood to see where it was coming from. It was a noise that was consistent with the RPM's because when I slowed down to pull over it slowed down. I was...
  25. Lost06

    Is it dead?

    Pretty loud. I could hear it over the stereo .

Latest posts

Members online

... and 24 more.
Total: 1,578 (members: 74, guests: 1,504)

Forum statistics

Threads
64,524
Messages
1,395,823
Members
51,908
Latest member
Kendziora

Share this page

Top