Search results

  1. C

    Tires still lean with camber all the way in....Please help

    Flip your upper ball joints. Bolt them on bottom of a- arm instead of on top. It gives you more room to work with and gets the arm off the stops .
  2. C

    What cam works best?

    No tune on mine "YET". Have not had any problems so far.
  3. C

    What cam works best?

    When I built my engine this summer I used " Crane Hydraulic Flat Tappet Camshafts 113901" My truck pulls and drives better than new. avg 16mpg. So far I would say this has been a good choice of cam for my application.
  4. C

    At wits end, need help guys!

    Chris, I believe you are correct sir.
  5. C

    At wits end, need help guys!

    Bought a new msd coil when I built the engine. Can't be bad. Still, what the hell, went and dug out my old coil and switched them. BOOM!!! Back to her old self! So msd gets a call in the morning. Hunter, from one Louisiana brother to another, THANK YOU.
  6. C

    At wits end, need help guys!

    I've got a 94 gmc 1500. back in june I replaced the motor and trans. 4-bolt main, bored .30 over, mild crane cam, msd dizzy, rebuilt tbi, new injectors and adj fpr, new fuel pump, and new sensors. Let me tell ya she ran like a scalded ape! That is till last week. now when you fire her up...
  7. C

    Finally! GMT800 style towing mirrors on GMT400.

    Got mine installed today. Used a taillight convertor to wire running lights and turn signals. These mirrors are awesome! Friend of mine got a set for his 03 and gave me the old ones so i'm gonna take out the leds behind the glass and wire them in on mine. I'll post pics this weekend.
  8. C

    Cb radios

    Great white, how well has the mount on your shell worked for you. I have been looking at getting one but have concerns about damage to the shell from wind load on the antenna. To the op, mine is located same as yours. Seams to be the most common place.
  9. C

    Custom Switches

    Found this web site today. http://otrattw.com/index.php They have ready made switches and can custom make anything ya need.
  10. C

    4 Hi Headlight Mod

    Got this done today. One more mod checked off the ever growing list.
  11. C

    3/4 leaf springs on a 1/2 ton truck

    This one's easy. I swapped in 3/4 tons in my 94 in about 3 hours. local pull a part had them for $25 a pair. impact and some PB blaster is all ya need. I did go with new u bolts and like above a balljoint press will help alot. retorque after test drive then bout a month later. added 1 inch of...
  12. C

    Help me I'm stumped. Truck died and will no longer run.

    K.I.S.S. Try a bottle of heet first. OP stated outside temps at o* to 30* Water in fuel will freeze at these temps. Wife's van did this last winter. My truck 2 winters ago. Place fuel down the throttle, if truck runs then dies, check for frozen lines first. If the heet doesn,t work, then follow...
  13. C

    Midwest Roll Call

    North of Grayville, IL. How about yall?
  14. C

    Midwest Roll Call

    I'll throw in the hat for southern illinois. Any idea's on sticker design yet?
  15. C

    Putting A Chip In A TBI Truck

    From dynamic efi web site: None of the EBL ECM systems are capable of running an 'E' automatic transmission. One can run the stock PCM for trans control and an EBL Flash (or P4/SFI-6 Flash) ECM for engine control. Many users of E transmissions have done this. O.K, what about those of us that...
  16. C

    Putting A Chip In A TBI Truck

    BTW southern pride. Very nice truck.:rocking:
  17. C

    Putting A Chip In A TBI Truck

    DAMN!!! I was all in till no e-matics. Seems if this guy has taken the time to write programs for the tbi's, he would have added the e-matic option for those of us with late 93 to 95 tbi. May call this guy for a chat.

Latest posts

Staff online

Members online

... and 11 more.
Total: 1,592 (members: 61, guests: 1,531)

Forum statistics

Threads
64,452
Messages
1,394,312
Members
51,698
Latest member
Grooter8824

Share this page

Top