Search results

  1. Z

    Tranny fluid dipstick reading

    Sometimes driving it helps to
  2. Z

    Has anyone used these springs before???

    I have use SD truck springs recently me and a friend went together and ordered out pairs together to lower shipping cost any way they are Mexican made spring so says the sticker in them over all they look like a quality part, I doubt they would be in business if they didn't sell a quality part I...
  3. Z

    Need help! On front end overhaul

    Moog suspension parts from northern auto parts, are your front wheel bearings loose or noisy if not there's no need to replace them, steering boxes is a likely place for steering slop on these trucks
  4. Z

    Gague Cluster or Dash Swap?

    You could always install a Dakota digital gauge set up in the 88-94 pickup if you get it
  5. Z

    1996 Suburban with 4WD and NP243 Fluid Recommendation

    Yep just use regular dex 3 or dextron 6 you will be good
  6. Z

    LQ4/4L80E/NP243 SWAP -HELP-

    I am curious how this goes for you as I am interested in doing a similar swap also! The things I know your goin to run into are motor mounts you will have to get some sort of adapter as gen 3 engine have a different bolt pattern and they are located differently than a gen 1 350. Also you may...
  7. Z

    Engine miss at idle when cold out

    I do still have the factory air cleaner on it yet but not sure if I had put the flex pipe back on any ya it's cold here in Nebraska lol I'll take a look at those things thanks !
  8. Z

    Engine miss at idle when cold out

    Hello every one I have a 92 k1500 with 93000miles on it, just put a new engine in it back august, and during this winter I noticed when it was really cold out it would miss at idle when warming up, after it was warmed up it seemed to run fine, it's got new plugs. Not new wires yet, have not...
  9. Z

    Engine bogging

    Ignition problem try replacing your plug wires and or spark plugs
  10. Z

    fresh vortec engine build won't start

    Probably don't have the distributor timed right 180 off
  11. Z

    High Idle! HELP!!

    Looks like your looking in the right direction possible that your not getting power to the iac valve it seems the ecu is comanding it closed but nothing is happening might have a broken wire to it
  12. Z

    95 silverado TBI running issue

    Possible vacume leak, needs tune up or miss firing on one cylinder or 2, check fuel pressure should be between 9 and 13 psi I believe, it could have a bad plug wire intermittently causing it to back fire if that's what you mean by hiccup, if it's back firing it's prolly not fuel related it's...

Latest posts

Members online

Total: 1,655 (members: 34, guests: 1,621)

Forum statistics

Threads
64,393
Messages
1,393,028
Members
51,566
Latest member
chirado93

Share this page

Top