Search results

  1. NorthTexasDylan

    Stranded...Please Help

    Heat shield on starter had slide forward and was touching the positive terminal on the starter and shorting it out. Blew the 40 amp fuse again. Fuse replaced and shield repositioned correctly and problem solved.
  2. NorthTexasDylan

    Stranded...Please Help

    Just saw the diagram for the 10 and 20 amp fuse in the cab. I guess I can check those in the morning.
  3. NorthTexasDylan

    Stranded...Please Help

    Not sure where this was supposed to go so I stuck it here. Drove the truck to the golf course today and everything was fine. Got in it to leave and turned the key and nothing. No clicking or anything out of the engine. Now all the lights work and the stereo screen flips up and the power...
  4. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    So I was wrong. There is a fuse in under the hood that I pulled. The light came on within a matter of minutes. However I did drive for about an hour today and it did not do it once. So I guess I covered up the issue.
  5. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Looks like the fuse is the same one for Speedometer and Cruise Control. Don't want to lose those things in exchange for fixing ABS.
  6. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Also it does not stop as well as it should when we hear that noise and it pulls left. It sounds similar to the sound you get when you slam on the brakes on ice. But not exactly the same.
  7. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    So sitting here thinking and reading. I did change out the ABS sensor on the passenger side. I wonder if I could have damaged the one on the drivers side during all the repairs. The sound sounds like its coming from the drivers front tire also. Its like a small motor running.
  8. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Well 1 down several to go. My Dad actually went to the dealership this morning to pick up his Duramax that was in for recalls and he told the service manager what was going on with my truck and said that he was told it needed to come to the dealer to have the ABS bled with a Tech 2. The...
  9. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Should I call around and ask if they have a Tech 2 or should I tell them I need the ABS bled?
  10. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Option 1 seems a little sketchy.... Option 2 seems expensive.... Option 3 seems time consuming.... I think I am going to opt to take it to a actual brake place like brakes plus or something like that and let them jack with it.
  11. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    :help::help::help: You got to be kidding me....Back to youtube I guess...LOL
  12. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Yes!!! All GREEN!!!
  13. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Was just sitting here thinking there are a couple other issues: 1. If you guys recall I replaced all the brakes and new master cylinder. Added new Pro Comp extended brake lines. I cannot get the brake pedal to firm up. Even had them "bleed the brakes" when they did the alignment and they...
  14. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Ok sorry I have not posted updates in so long. Been tinkering around with things and finally got it where I want it....I think :) So I got those UCA drop brackets installed. I went ahead and picked up a set of offset bushings for the UCAs. For those that dont know they offset the camber bolt...
  15. NorthTexasDylan

    Just got a new truck and I am looking for advise and information

    The best I can figure out is that it is a Trail Master. Look for some stamping on the block that is mounted on top of the knuckle. Between the knuckle and UCA.
  16. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Control Arm Drop brackets installed
  17. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Went ahead and picked up 2 pairs of offset control arm bushings. I installed them on the drivers side last night and will have the passenger side put back together today. I will take some photos this afternoon. Hope this will finally bring it in enough to get in the green.
  18. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    I dont have the other side totally back together. Still have to put the hub back on and connect the tie rod then throw the tire on. One thing about the picture is the passenger side is on a jack stand. I am hoping that when I let the passenger down that the tire comes in a little more. If...
  19. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    So here are a couple pictures that I snapped.
  20. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Yep got one side all bolted back together. With the cam bolts adjusted all the way in its still a little out of the top. I just hope I got it within specs...... Getting the other side on tonight and then will shot some pics.
  21. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Got the driver's side rough fitted last night. Put the drop brackets on and mounted the UCA to it. Then removed that old Trailmaster spacer from the knuckle. One thing I didn't notice was in the instructions it says to remove the sway bar and flip it and reinstall it using factory linkage...
  22. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    You have to cut off the bump stop that is just below the rear mounting bracket for the UCA. It was actually really easy. Got a $3 cutting wheel for the 4 1/2" angle grinder and tore right thru it. Then used a $7 steel grinding/buffing wheel to smooth it down even with the frame. Was not...
  23. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Found something with a little thinner wall/smaller overall diameter at ACE. Very strong. Talked to the guy there and asked him about cutting it and then running a bolt thru it could it hold up and he said without a doubt. "You are not going to bend this." Going to start tearing it apart...
  24. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Went to Fastenal and they had the bolts but not the sleeves. Said they had never seen anything like that. Went to Home Depot and they have nothing. So I got a piece of steel pipe that I figured I could cut up if I could not find the sleeves. Going to try Napa and Oreilly's tomorrow and see...
  25. NorthTexasDylan

    Do I need new knuckles? Where can I get them?

    Ok I am going to look around tomorrow and see what we can find. Fingers crossed!!!

Latest posts

Members online

... and 17 more.
Total: 1,934 (members: 67, guests: 1,867)

Forum statistics

Threads
64,465
Messages
1,394,690
Members
51,728
Latest member
Car_Guy_YYC

Share this page

Top