Search results

  1. dans

    1998 K1500 Transfer Case Locks in and Actuator works......NO 4X4

    Does oil fill this area in the pic above ? Or just a little drip past the drivers side gear? I fixed mine but a little oil drips past the axle seal on the passenger side were it gets close to the cv axle.I hope it just from having it jacked up before I refilled it while replacing the drivers...
  2. dans

    Test front axles ?

    Help
  3. dans

    Help with 4x4

    Anyone?
  4. dans

    help with 4x4

    I welded the gear to the axle so the clips won't slide out.Works good so far.
  5. dans

    what gear oil do you run?

    Richard a lot of your past posts have helped me so I gotta ask you something.My 92 clicks turning only in 4wd on the drivers side.The cv boots are fine.About the throw on a new cv anyways You ever see the cv click with good boots in 4x4 only?Thanks, Dan.
  6. dans

    what gear oil do you run?

    I thought we use no additives/friction modifiers on the rear.Strait oil or you mess up the locker.
  7. dans

    question on my 92 k2500 front axel

    Mines a 92 also.Easiest thing to check first is the passenger axle popping out of the diff.It's the passenger axle tube diff side not the cv axle .The gap looks like this and the 4x4 light wont come on if it slides out.
  8. dans

    question on my 92 k2500 front axel

    Well I got rid of the gm part and installed a posi lock 4x4 wire control.Later my light wouldn't come on and it was my passenger side axle popping out of the diff.See here http://www.gmt400.com/threads/help-with-4x4.39183/
  9. dans

    Test front axles ?

    I'm getting some clicking/popping on the drivers side while in 4x4 turning.Is there a way to test the axle?The boot looks good and it doesn't do it in 2wd.Can anyone explain to me how the 2wd and 4wd axles/hubs work on my 92.Thanks.
  10. dans

    Help with 4x4

    I got my 4x4 working again but now I hear drivers side popping in 4 wheel drive when turning.It doesn't do it in 2wd.It doesn't pop in 4wd going strait.Cv axles look good and the boots are not ripped.Any ideas?
  11. dans

    help with 4x4

    Well it slid out again driving in 2wd.Is it safe to drive in 2wd with it slid out a bit? Not sure why it keeps sliding out.Maybe the c clip I got from the auto parts store broke.I wonder if I could weld it together? Weld the gear to the axle so it wouldn't slip out.
  12. dans

    help with 4x4

    I put the washer on the nipple and a new c clip on the gear that goes on the axle.old one was broke in half.
  13. dans

    help with 4x4

    yep slides out.
  14. dans

    1998 K1500 Transfer Case Locks in and Actuator works......NO 4X4

    Man this is gonna save me too.
  15. dans

    help with 4x4

    Thanks for all your help.
  16. dans

    help with 4x4

    Can I leave the cv on the hub to do this?
  17. dans

    help with 4x4

    Thanks.Sounds easy.
  18. dans

    help with 4x4

  19. dans

    help with 4x4

    If the passenger side output shaft came out and the shift fork and other parts came loose..Can I fix/ rebuild it with the diff still on the truck?
  20. dans

    help with 4x4

    what does power brakeing do ? Thanks
  21. dans

    help with 4x4

    The cable is working.I took it apart and re enstalled it.Any tricks to test the front diff? Could it be the transfercase even though it spins the shafts?
  22. dans

    help with 4x4

    My 1990 k1500 has a new crate tranny and crate motor I installed.I kept the old transfer case with a posi lok.I just put in the tranny and now my 4x4 light doesn't come one and I know the posi lok is working.I even removed it and pushed inside were the posi lok goes and the 4x4 light doesn't...
  23. dans

    4x4 Posi-Lok Cable Activated Front Differential Install

    I have this on m 90 z71.The 4x4 light doesnt come on anymore after I installed a new transmission.Any ideas? It used to come on with the posi lock before.Maybe I damaged the ball sensor during install?
  24. dans

    Help with 700r4

    Well the vent tube had a clogged rubber hose on it.Removed it and couldn't blow through it at all.Still shifts into second at 30 mph though.I hope I didn't screw up the tranny towing with the vent hose plugged up.
  25. dans

    Help with 700r4

    My 1990 k1500 5.7 truck has some issues with the 700r4.Great truck with a new crate motor I swapped in last summer but the 700r4 has 189k on it.First issue has been happening for a year or so.Sometimes the tranny spits out fluid through the dipstick hole when full.No I didn't over fill it.So...

Latest posts

Members online

Total: 1,023 (members: 15, guests: 1,008)

Forum statistics

Threads
64,393
Messages
1,393,034
Members
51,568
Latest member
SirTurdFerguson

Share this page

Top