Search results

  1. red1

    bedliner coated bumper

    has anybody done this? if so can you post pics, thinking about doing mine before long.
  2. red1

    pop,pop,pop in 4 low ?

    My 91 gmc pops in 4 low only going forward smooth as silk in reverse dose not do it in 4 hi or in 2 wheel as it pops, I can fill it in my feet right where front drive shaft is. all u joints good, anybody have this problem before ?
  3. red1

    dressed in black-91 gmc

    http://www.gmt400.com/attachments/image-jpg.37031/
  4. red1

    8.25 ifs rebuild

    well I got 8.5 thou on my backlash, range was 6 to 10 thou had to change pinion shims 3 times but came out with a real nice pattern will tear down tomorrow and put crush sleeve and pinion bearing in(used setup bearing) bend the lock tabs in place and call it good.
  5. red1

    8.25 ifs rebuild

    Checking backlash best way I found to hold it still to get a good reading
  6. red1

    dressed in black-91 gmc

    rebuild of the gm 8.25 with 4.56 gears
  7. red1

    dressed in black-91 gmc

  8. red1

    dressed in black-91 gmc

  9. red1

    dressed in black-91 gmc

    Dressed in Black is my 91 GMC I got the truck 5 years ago bone stock z71 it now has new motor and transmission along with a rough county 6 inch lift 15 inch pro comps with dick cepek 35s. All bushings are poly front and rear all new moog tie rods ball joints and idler arm and pitman arm. As for...
  10. red1

    8.25 ifs rebuild

    well still in the rebuild phase. lucky I had a donor axel so I can still use my truck as my DD. I set the backlash tonight will check my pattern tomorrow night and then get every thing buttoned up this week and hopefully I can swap it out this weekend. but I have made up my mind that if a person...
  11. red1

    8.25 ifs rebuild

    here are some of the part numbers for some of the small parts. Yukon side bearing adjuster lock tab #yspsa-009 you need 2 of them for rebuild Yukon stub axle retaining clip #yspsr-013 you need 2 of them for rebuild you need one sch-78 bearing for the small stub shaft you need three b-2012...
  12. red1

    8.25 ifs rebuild

    All you can do is try right. When you do the swap keep us posted on how it works with the locker. The half ton stuff works good for me on the street and farm for hunting and plus I don't tow much so it last a long time for me even with 35s but that's as big of a tire the half ton units will...
  13. red1

    8.25 ifs rebuild

    I wish my pig had the 9.25 since I have the 35s. But the 8.25 is okay if you treat it right but if it ever go's I will sas it. Can you run a locker with out turning it into a grenade? I know the 8.25 and 9.25 have a bad wrap of going bang but it seams most of the time the cv will go before the...
  14. red1

    8.25 ifs rebuild

    Well I would like to shake the mans hand on his pics made me thank I could do it and save the money on labor. And hay what ever floats his boat lol
  15. red1

    8.25 ifs rebuild

  16. red1

    8.25 ifs rebuild

    If you have 3.42s now it won't be worth the time and money unless you have 35s or 33s and with a tire that big I would put 4.30s or 4.56s for a daily driver or 4.88s for a off-road build but 3.42 to 3.73 is not much change just my 2 cents worth
  17. red1

    8.25 ifs rebuild

    Well getting it apart has been easy not as bad as I thought it would be. Got the new ring gear and bearings on today. I'm in the process of cleaning the case up real good now. Will post part numbers soon. And grampadirt your thread was awesome it had a lot to do with me doing it my self thumbs...
  18. red1

    1991 gmc blower motor speed

    I thought that's what it might be with the fact I lost low then medium and now high is acting up
  19. red1

    The Stupid Axle Questions Thread

    Yes I agree. I was just trying to get the point across of how versatile the e lockers are. But in the snow and ice it's all about control some people just can't drive in it I never worrie about me I worrie about the others that can't drive in it lol
  20. red1

    1991 gmc blower motor speed

    my 91 has the 3 speed ac/heat blower motor. only one speed works, high. I have not had this problem before what part should I be looking for? relay or resistor ?
  21. red1

    The Stupid Axle Questions Thread

    The E locker is nice in snow and ice. A mechanical locker in bad weather can be hard to drive. Both have there pros and cons I would pick the E locker you can simply run unlocked for snow and ice but in the mud and rocks lock it up by a switch when you need it plus in the ice and snow when you...
  22. red1

    8.25 ifs rebuild

    well time has come to tear in to this 8.25 ifs unit and ditch the 3.42s and go to 4.56s I have done the rear with 4.56s and was a easy swap. but I have to say this 8.25 is a lot more involved. I will try to post pics and part numbers for rebuild

Latest posts

Staff online

Members online

... and 4 more.
Total: 1,489 (members: 54, guests: 1,435)

Forum statistics

Threads
64,672
Messages
1,398,412
Members
52,199
Latest member
NickArchibald1994

Share this page

Top