Search results

  1. I

    10-Bolt G80 Differential

    Interested if still available
  2. I

    Anyone got the wiring diagram for rear lights/trailer wires?

    I want to wire up my truck to be able to handle a 7-pin trailer, and am wondering if anyone has the diagram for the harness
  3. I

    Calipers for 1996 C1500

    SO I have access to some calipers from a '93 K3500, the same truck I got a hydroboost unit and MC from. I'm wondering if those calipers will work properly with my 5-lug front end, which I intend on keeping, If not, I'd like to know which calipers I need to upgrade to for my hydroboost swap...
  4. I

    Brake upgrade- what have you done?

    See, I would do a -800 Master, but I'm gonna do hydroboost out of a -400, because then I can maintain a more factory look (fluid reservoir) under the hood, and that still should increase stopping power.
  5. I

    1998 C1500 speedo recalibration for gear swap.

    I know that the local GMC dealer has recalibrate my speedo/odo before, but Not sure which tool they used.
  6. I

    The **GREAT** Valance Debate

    My truck is strictly a pavement cruiser, so the valance stays on, and looks good.
  7. I

    Further Information on HID, LED, and even Halogen Headlights

    So the HID lows have a good pattern in your factory housings? Or are you using a different housing here?
  8. I

    Danville Cars&Coffee

    Reminder, this Sunday, March 1st, there is a Cars&Coffee Coffee. It's in Blackhawk Plaza as per usual, at the end of Crow Canyon Road in Danville.
  9. I

    The Stupid Axle Questions Thread

    Another note, is it gonna be limited slip?
  10. I

    The Stupid Axle Questions Thread

    Yeah it's a 10.
  11. I

    2wd stock suspension du forum needed

    I have a good list of questions relating to parts and procedures for redoing the suspension in my C1500, while retaining stock ride height. I bet I'm not the only one who wishes there was a sub forum for this, and not just a "lowered and bagged" one, as I don't plan on doing either to my truck.
  12. I

    The Stupid Axle Questions Thread

    Well I have grease inside my drum brakes, so looks like I need to pull the axle shafts, replace the bearings and seals. How do I do this, and what size bearings and seals will I need? My axle RPO is GU6. The truck is a C1500, 1996.
  13. I

    Rear disc conversion with parking brake and ABS

    Hey all, I want to convert my rear brakes to discs (because I hate working on drums), and still keep the ABS functionality, as I plan on towing with my truck? And want the added safety to prevent jackknifing. Also need to keep the parking brake. Who has done this, and what parts were used?
  14. I

    Oil filler neck gasket

    So I finally noticed the source of my oil leak today while I was doing some steering shaft work, and it's the oil filler neck. I was wondering about the process of replacing the gasket for it. I've heard about removing it altogether, but I'd rather retain the factory look.
  15. I

    Superbright LEDs Headlamp bulbs

    You mentioned a glare cap. Is this in the bulb itself, or the housing?
  16. I

    LED headlight bulb replacement install

    Will this LED mod work in stock GM housings?
  17. I

    1500 Hydroboost Conversion Part Numbers

    Am I going to need the proportioning valve even though I have ABS?
  18. I

    Superbright LEDs Headlamp bulbs

    Okay, I see what you mean. Sucks that I'm restricted to using halogens in my factory housings.
  19. I

    Superbright LEDs Headlamp bulbs

    The image after that one shows the beam on a wall at 25ft, and it looks to be a proper low beam.
  20. I

    Superbright LEDs Headlamp bulbs

    So here are now LED headlamp conversions for our trucks, and I was wondering if anyone here has tried them, and if so, how well they work. I'm hoping to have functional high and low beams, without the lows blinding other drivers (see HIDs in reflector housings). the links to the kits are below...
  21. I

    Danville Cars&Coffee

    Danville Cars&Coffee - Monthly Meet, first Sunday Hey all, For those of you in the San Francisco Bay, there's a cars and coffee meet in Danville on the first Sunday of every month. It's in Blackhawk Plaza, and fills up early (by 7:30) I am always here with my '96, and there are sometimes a...
  22. I

    GM roadside emergency kit

    I found the one from the Suburban last night in the house. Looks like I need to get a Chevy Trucks Maglite, but it's otherwise pretty complete.
  23. I

    GM roadside emergency kit

    My family has had 3 GMT400s. My dad had a 1989 K1500, the '96 Suburban, and then I have my '96 C1500
  24. I

    GM roadside emergency kit

    I'm pretty sure that was the case, but my main concern is knowing what was written on the bag, so that during the restoration of my truck, I can include this.
  25. I

    GM roadside emergency kit

    Not sure if this is the right place to post, but seeing as I tend to keep stuff like this in my cab, I'll try here. I remember that in my family's 1996 Suburban, we had a roadside emergency kit that included a first aid kit, disposable Kodak camera, Maglite, and multi-tool, all branded with the...

Latest posts

Members online

... and 14 more.
Total: 1,723 (members: 64, guests: 1,659)

Forum statistics

Threads
64,496
Messages
1,395,213
Members
51,823
Latest member
Fish98C2500

Share this page

Top