Good job so far, if you have any questions don’t hesitate to ask. I just got done setting up a 14 bolt and finishing up an 8.25”. Not an expert by any means but I have set up gears in half a dozen trucks and Jeeps.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
That's dang near textbook right there!Well no time with kids n work so I finally got the 4:11 all buttoned up and something was wrong apparently as the final pattern sucked...I must have done something wrong. So out she came another 39 times lol. I finally ended up with an .018 under the pinion bearing (factory was .037) and an extra .005 on the left carrier bearing plus the stock shim ...the right side just took the factory shim. Glad it's over ...it was a learning experience for sure. So it's on to putting the rear brakes back together,bleeding etc then insure this dog and take her for it's maiden voyage . Hope to be on the road in the next 3-4 weeks ....just no time with work and kids.You must be registered for see images attach