Recent content by Pab's

  1. Pab's

    Interested in re doing my suspension. ADVICE PLS.

    Thanks for the info guy's. I think 4/6 will be too low for me but I'll keep all my parts just in case. All I want is a little better stance and a smoot ride, Im building this as a cruiser.
  2. Pab's

    Interested in re doing my suspension. ADVICE PLS.

    Thanks! Do you know if those are better than the beilsteins?
  3. Pab's

    Interested in re doing my suspension. ADVICE PLS.

    Agree. I've seen some 2/4'so that look good, I'm going to try it. Thanks for the advise. Does anyone have the part # for the shocks?
  4. Pab's

    Interested in re doing my suspension. ADVICE PLS.

    Ok so far besides the lowering kit I've got: ball joints, tie rod ends, sway bar link kits and bushings, control arm bushings, pit man arm, idler arm, drag link. Y'all see anything I missed?
  5. Pab's

    Interested in re doing my suspension. ADVICE PLS.

    Greetings, I have a 92 Silverado sitting on 18's and I'm doing my homework because here in the near future I will be redoing my suspension. I want good performance and great ride... I'm currently leaning towards McGaughy's 2/4 kit...
  6. Pab's

    1992 Silverado from Tx

    Got them installed. I've already put about 200 miles on the gears and they feel good.
  7. Pab's

    Noob Horse Power question! W/parts list.

    Well I chose those heads due to some recommendations but this was my 2nd choice. http://www.summitracing.com/parts/tfs-30410007/overview/make/chevrolet
  8. Pab's

    Noob Horse Power question! W/parts list.

    Thanks for the info guys. Tyler you say the heads are bad, could you elaborate? I am planning on tuning, with mods like that it's a must. With all these mods I would obviously change out the fuel pump as stated on the initial post. I figured I would need to redo the exhaust, x pipe wase thought...
  9. Pab's

    Anyone from San Antonio Texas? !

    2 hrs huh. Not too bad!
  10. Pab's

    Anyone from San Antonio Texas? !

    Just wondering where the San Antonians are at? Do you guys meet up somewhere? Is there a shop you recommend? Lmk
  11. Pab's

    Noob Horse Power question! W/parts list.

    Bump.
  12. Pab's

    '89 Camaro 350 roller motor going in my '90 K1500 SWB

    Anything new?
  13. Pab's

    1992 Silverado from Tx

    3.23's I think, it's been a while since I looked up the RPO codes. Also got this in today! Brake calipers with upgraded pads. And upgraded the rotors too....
  14. Pab's

    Noob Horse Power question! W/parts list.

    I'm in the process of building my truck. I would like 300-350 RWHP! I'm looking at using the following components, please advise. Thanks! HEADS: http://www.summitracing.com/parts/sum-162108/overview/ CAM: http://www.summitracing.com/parts/lun-10120700 INTAKE...
  15. Pab's

    1992 Silverado from Tx

    Yeah buddy!!!! 3.73's with a LSD.
See more

Latest posts

Staff online

Members online

Total: 1,042 (members: 18, guests: 1,024)

Forum statistics

Threads
64,504
Messages
1,395,360
Members
51,845
Latest member
GMACGMC

Share this page

Top