Thanks for the info guy's. I think 4/6 will be too low for me but I'll keep all my parts just in case. All I want is a little better stance and a smoot ride, Im building this as a cruiser.
Ok so far besides the lowering kit I've got: ball joints, tie rod ends, sway bar link kits and bushings, control arm bushings, pit man arm, idler arm, drag link. Y'all see anything I missed?
Greetings,
I have a 92 Silverado sitting on 18's and I'm doing my homework because here in the near future I will be redoing my suspension. I want good performance and great ride...
I'm currently leaning towards McGaughy's 2/4 kit...
Well I chose those heads due to some recommendations but this was my 2nd choice.
http://www.summitracing.com/parts/tfs-30410007/overview/make/chevrolet
Thanks for the info guys.
Tyler you say the heads are bad, could you elaborate? I am planning on tuning, with mods like that it's a must. With all these mods I would obviously change out the fuel pump as stated on the initial post. I figured I would need to redo the exhaust, x pipe wase thought...
3.23's I think, it's been a while since I looked up the RPO codes.
Also got this in today! Brake calipers with upgraded pads.
And upgraded the rotors too....
I'm in the process of building my truck. I would like 300-350 RWHP! I'm looking at using the following components, please advise. Thanks!
HEADS: http://www.summitracing.com/parts/sum-162108/overview/
CAM: http://www.summitracing.com/parts/lun-10120700
INTAKE...
No leaks so far with the stainless hose. Not the prettiest set up but I'll fit it better later, also got an Optima Red top for 50% off. In the pictures you can see the dual fan set up.
Alright. ...got the hose installed and drove it around with no issues.
Next question. What do I do now for performance? Is it time to start tearing the motor apart? Ie. Heads and cam.
Thanks I was looking but for some reason only the rubber ones came out. I ordered a 35" hose and will fab up a bracket. Just waiting on the hose now...
So is been a while but I finally was able to get the fans installed properly. As you know you fix one problem only to find another one, so here are some pictures. Any ideas on how to permanently fix this while looking clean?
My temporary fix