Recent content by HRV-LS1

  1. H

    Logging in

    For some reason, the login doesn't work. I have to type in gmt400 login from the internet in order to get to the log in page.
  2. H

    Speedometer is totally off!

    Hello, Installed a 5.3 Chevy engine into my 95 GMC truck. I have 265/70/R17 tire wheel combination. My pcm was programmed but the speedometer is off. For example, when the speedometer is showing 40mph, I'm actually driving at 48mph. I believe that my rear differential is stock from the...
  3. H

    4l60e vette servo install

    Got a problem. Installed the corvette servo kit. I can't get the snap ring on to the servo cover. Is there a special tool to buy? I've tried squeezing the ring with bare hands, fingers. Tried with needle nose pliers.etc. NEED HELP!!!
  4. H

    Chrome front bumper question

    Need a new front chrome bumper. I ordered one off of ebay, got it and was disappointed with the cheap quality of it, not to mention all the dents from shipping. Anyway, has anyone purchased the chrome bumper from LMC truck part number 39-9803? If you did, is it a good bumper? How does it...
  5. H

    FLUSHING THE TRANS USING THE TRANS

    THANKS, MARCOS!
  6. H

    FLUSHING THE TRANS USING THE TRANS

    I GUESS NOBODY CARES? OH WELL... I TRIED ASKING.
  7. H

    WANT A DRAIN PLUG FOR MY 4L60E....

    PONCHO62, THAT'S A GOOD IDEA TOO, UNFORTUNATLY CAN'T FIND ONE THAT ALSO HAS A MAGNET. I WOULD LIKE TO BE ABLE TO SEE WHAT TYPE OF WEAR THE TRANS HAS. THE PRICES OF THE PANS WITH THE DRAIN PLUGS ARE GREAT, $25-$40. IF ANYBODY SEE'S ONE WITH THE DRAIN PLUG AND MAGNET LET ME KNOW.
  8. H

    FLUSHING THE TRANS USING THE TRANS

    Want to flush out my 4l60e. The truck's a 95. Seen it done on youtube. The guy used the truck's engine running to pump out the fluid, 2 quarts at a time. Then he added 2 quarts back. He kept on until the fluid was clean. He attached a clear hose to a fitting he screwed into the top of the...
  9. H

    WANT A DRAIN PLUG FOR MY 4L60E....

    I do currently have the drilled through one installed. I don't like it, because it leaked and had to gum it up with some sealer. Doesn't look good. That's why I would prefer the weld on one.
  10. H

    WANT A DRAIN PLUG FOR MY 4L60E....

    WANTING TO WELD IN A DRAIN PLUG FOR THE 4L60E. ANYONE DONE THIS? WHAT SIZE BOLT/ NUT DID YOU USE? IS THERE A RUBBER O-RING FOR THE BOLT OR A COPPER WASHER? ANYBODY?
  11. H

    DOOR PINS - PROBLEM

    Should have been more clear on the pop sound. The door pops out when I open it. It's like its being pushed out.
  12. H

    DOOR PINS - PROBLEM

    The door still closes hard after all this time gone by. I do notice that the door pops when I open it. Bought my weatherstripping from lmc. Anyone with the same problem? Should I buy gm weatherstripping?
  13. H

    NEED NEW SHOCKS-- 95 GMC

    HAVE A 95 GMC SIERRA. THE TRUCK NEEDS NEW SHOCKS. I CAN FEEL THE BUMPY ROAD ALL THE TIME. ANYWAY, THE PREVIOUS OWNER LOWERED THE TRUCK IN THE BACK 1 ". WHAT ARE THE BEST SHOCKS FOR ME? DO I NEED TO FIND SPECIAL SHOCKS FOR THE BACK BECAUSE ITS LOWERED 1"?
  14. H

    QUESTION ABOUT SANDEN A/C COMPRESSOR

    EVEN IF I DO WHAT YOU SUGGEST, THE COMPRESSOR WILL STILL BE IN THE WAY OF THE AIR INTAKE TUBE. BY THE WAY, AWESOME TRUCK LEXTECH!
  15. H

    QUESTION ABOUT SANDEN A/C COMPRESSOR

    INSTALLED A 5.3 CHEVY INTO A 95 GMC SIERRA. NEED AIR CONDITIONING. THE SANDEN COMPRESSOR IS PROBABLY WHAT I'LL INSTALL, BUT THERE WILL BE A PROBLEM. THE COMPRESSOR WILL BE IN THE WAY OF THE AIR INTAKE TUBE GOING TO THE THROTTLE BODY. ANY REMEDIES FOR THIS PROBLEM? HAS ANYBODY CUT OR TRIMMED THE...
See more

Latest posts

Members online

... and 12 more.
Total: 1,606 (members: 62, guests: 1,544)

Forum statistics

Threads
64,523
Messages
1,395,801
Members
51,908
Latest member
Kendziora

Share this page

Top