Recent content by Dharmabum
-
D
4 Hi Headlight Mod
Just figured I would add I did this mod today in the parking lot while my kid was at football practice, took about 20-30 minutes. I tapped in to the low beam and high beam wires on the drivers side in front of the fuse box and pulled power directly from the box with an inline fuse. I also...- Dharmabum
- Post #387
- Forum: Audio + Electronics
-
D
Door locks stopped working using button but key fob still works
Check all your fuses, I just had the same issue on my 98 Burb and I believe it was my horn fuse that was blown, put in a new one and the lock switches started working.- Dharmabum
- Post #9
- Forum: OEM and Custom Interiors
-
D
Where to get solid 1.5" rear blocks?
Thanks for the replies, I will need new u bolts, mine definitely aren't long enough for blocks. I found a Tuff Country 1.5" block and u bolts for a good price but I'm not sure what the block is made of but it looks beefy enough. I heard the Rough Country 2" blocks are good but the 1.5" ones are...- Dharmabum
- Post #5
- Forum: Stock Suspension + Bolt On Kits
-
D
possible MPFI swap ?
I picked up a very clean 98 suburban with 127k miles on the 5.7 last week. It runs great, smooth on the highway, not a ton of power but what I would expect of a small block in a heavy truck, etc.. but does have a starting problem at certain times. If it has been running and I stop to run in a...- Dharmabum
- Thread
- Replies: 0
- Forum: Engine Performance + Maintenance
-
D
Where to get solid 1.5" rear blocks?
Just picked up a 98 Suburban K1500 and after fixing some little issues with it to make it a reliable winter driver I am planning on lifting it slightly and adding some 285/75 16s. I have been looking at rear blocks and would prefer to get a solid rear block as opposed to the cast ones or hollow...- Dharmabum
- Thread
- Replies: 4
- Forum: Stock Suspension + Bolt On Kits
-
D
getting seat to slode farther forward in ext cab
Yeah I'm using the handle on the seat back that tilts it and slides it forward all at once, it just seems like it could go farther...- Dharmabum
- Post #3
- Forum: OEM and Custom Interiors
-
D
getting seat to slode farther forward in ext cab
I recently got a 95 GMC extended cab Z71 with the 60/40 bench and was wondering if anyone had modified the slider mechanism on the passenger side to allow for better back seat access? I will really only use it for my kids and they can squeeze in but it seems like the seat could slide forward 4...- Dharmabum
- Thread
- Replies: 2
- Forum: OEM and Custom Interiors
-
D
Steering parts manufacturer Moog vs. Others
I need to do some work on the front end of my 95 GMC Z71 extended cab. It's got 247k miles and definitely needs a pitman arm and idler arm. I may do the tie rods too, gotta check them out still. Anyways money is tight and I know Moog is preferred but looking on Rock Auto at my options I see...- Dharmabum
- Thread
- Replies: 4
- Forum: Stock Suspension + Bolt On Kits
