Southern Pride
I'm Awesome
Alright fellas well last year I went to puttin a new EGR on the truck (don't remember why) and so I put it on and when we plugged up all the vac lines it would want to stumble on it's face hard from a take off and when it got goin it would run fine...What we ended up figuring out is that if the line that comes off the valve was left open, it would run okay. I've been getting a code for a long while code 32 = egr failure...so, I'm trying to get this figured out because the truck sometimes at cruising speed will miss and bog badly and then catch and then stumble. Then I'll get back in the truck 30 minutes later and it will run fine for a bit. It does NOT only act up when the CEL is on jsyk. It will idle fine and everything sitting still but it's only at cruising speeds and I feel like I have to push more into the pedal to pull though all of the missing and stumbling...BTW this a 350 TBI. Take a look at these pics I'm holding the cut off line that we just leave open....You can also see another line that is plugged in next to the sensor that is also cut.....I'm hoping to the lord someones will see this and can show me how to hook it up correctly (as it might of just not been hooked up right) but anyway we were connecting the line I'm holding in the pic on where you see the other random cut line and it would fall on it's face. Let me know if that's not the right spot to plug it in or anything you can do to help!
You must be registered for see images attach
You must be registered for see images attach