6 inch to 4 inch?

[MYT HI]

I have a procomp 6 in drop bar setup but I want to make it lower, like a 4 inch lift. can I like uncrank the torsion bars to lower it to about 4 inches?

 

[dirtyhick42]

the drop bracket for the 4 and the 6 are exactly the same the 6 inches is achieved by cranking

 

[TylerZ281500]

the drop bracket for the 4 and the 6 are exactly the same the 6 inches is achieved by cranking

depends on what style procomp. mines not cranked at all and sits at 6" mine drops 6" with the brackets were as rcx is 4" drop with crank.

 

[oohunter04oo]

depends on what style procomp. mines not cranked at all and sits at 6" mine drops 6" with the brackets were as rcx is 4" drop with crank.

A RCX drop bracket is 5.25". I measured mine before installing it. So you crank to get the 6" or decrank to get the 4". I'm sure any lift can be decranked to close to 4". Even if it has a true 6" drop bracket.

 

[TylerZ281500]

hmm something doesnt add up then.

 

[dirtyhick42]

hmm something doesnt add up then.

What's not adding up? This is something that has been known for a long time.

 

[Kyle97GMC]

Like hunter said. I have had my RCX at four inches and now it's at about six maybe a little more and i've had zero problems with either height

 

[oohunter04oo]

What's not adding up? This is something that has been known for a long time.

X2...

 

[Horns]

What's not adding up? This is something that has been known for a long time.

~Via Mobile

 

[TylerZ281500]

well between all my friends all our drop brackets measure differently from upper to lower bolt center point, then if you ,easure out tailights or fender heights were all way off from each other. im not cranked at all riding at 6" my friends rcx rides at 4" with some crank and another friends rides at 4" with no lift. but the drop brackets tell differently as well where as mines at 6" and theirs say like 4.5 or something around that.