LoudnLifted88
Small Block Grim Reaper
so when you go to the yard have them save the u bolt plates when they pull it
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
alright then ill just have to get some new u bolts and a conversion joint
unless you can save yours then yeah get some new ones
Not saying you didn't know this but, never re-use old u-bolts. The u-bolts and threads stretch and fatigue and should not be re-used. One time use part.
The spring plates are $30 new for the pair and the U-bolts are $19 for all 4 with nuts from LMC, you can re-use your U-bolt spacer.
http://www.lmctruck.com/icatalog/cd/full.aspx?Page=128
You can probably get them cheaper and no shipping from the dealership.
There will be no seeing tham haha I'm from Iowa so prob will end up cutting them off. But the axel tubes are the same diameter on the 10b and 14b correct?
Yah or on ebay, Thanks for all the help so far guys!
id see if you can match up trucks as best as you can. i dont know if trans lengths are different, i want to say they arent but could be wrong. anyways if you find a sf 14 bolt get the driveshaft with it maybe so you dont need to shorten or lengthen yours, or have the yard hold it if it had one so if needed you could come back later.